Active Member
|
[China]
Address: No. 30 Hongkong Middle Road, Qingdao City, China
Contact name:Jack Liu
HEBEI QINYI CONVEYING EQUIPMENT CO.,LTD |
|
|
Self Aligning Belt Conveyor Idler Roller For Cement
Product Description:
1. As the typical product in the gravity rolller series, it is
widely applied, especially in the carton conveyring area. e.g
airport luggage handling and logistics distribution center.
2. Precesion ball bearing polymer bearing housing , end cap form
the bearing unit which is very important . It is not only for good
looding but also further more the smooth and quiet running.
3. The end cap of roller resist dust and water splash well in
operation environment.
4. The design of pwlymer bearing housing makes it able to operate
in some special environment.
5. The lubrication method of bearing could be oil lubricating or
grease lubricating as requirement
6. Suitable for the high speed conveying. Speed could vary
according to diameter and length of roller, Max.speed up to
120m/min.
7. Semi-precision bearing for option, smooth running, be used for
gravity roller conveyor in low speed(<30m/min)
8. Temperatue range: 0 to +40ºC
Main Features of Conveyor Self-Aligning Roller
When the position of the belt is changed from its center line on
the same plane, the self aligning idlers can correct this
condition.
There are three types of self aligning idler: blocking idler,
friction idler and taper self aligning idler.
There are used both carrier and return section.
Layout 1 set per 10 sets at carrier section.
Layout 1 set per 6-10 sets at return section.
| Product | Conveyor Roller |
| Material | Q235 for Pipe, #45 for Shaft. |
| Diameter | 60-219mm(60,76,89,102,108,114,127133,159,178,219,etc). |
| Length | 100-3500mm. |
| Sealing | Lithium Soap Type Grease, Grease Retaining Ineer Seal With Muti-stage Labyrinth and Retention Cap With Outborad Flinger Seal. |
| Bearing | Single & Double Row Deep Groove Ball Bearing 2RZ&2Z with C3 Clearance. |
| Standard | GB,DIN,ISO,CEMA,JIS. |
| Welding | Mixed gas shielded arc welding end. |
| Painting | Ordinary Painting, Hot Galvanized Painting, Electric Static Spraying Painting, Baked Painting. |
| Application | Mining, Port, Cement, Steel, Metallurgy, Electric Power, Coal, Machinery and Other Industries. |
Product Details:
1. Standard: GB/AS/CEMA/JIS/DIN.
2. Lift time: 30000-50000hours
3. Output: 500000 pcs/ year.
4. Warranty: One year.
5. Roller Diameter: 60-219mm.
6. Roller Length: 150- 3500mm.
7. Roller Pipe: Q235 carbon steel, with good state-of roundness and
straightness,and the pipe will be machined before welding with the
bearing house to ensure well-balanced rotation.
8. Shaft: Q235 or #45, made of cold-drawn bright round steel.
9. Bearing: Ball bearing C3 , HRB,SKF,NSK
10. Seals: Labyrinth seals, have a good water proof and dustproof.
11. Welding: Mixed gas shielded arc welding end.
12. Color: According to your requirement.
13. Surface: Powder coated /galvanized.
