Active Member
|
[China]
Address: No. 3999 LiuJiang Road, Liushi, Yueqing, Wenzhou, Zhejiang, China
Contact name:Sunny Zhang
WENZHOU SANTUO ELECTRICAL CO.,LTD. |
|
|
Residual current circuit breaker with overcurrent protection 40A 30mA Din Rail RCBO Magnetic type 1P + N , 3P+N AC
STRO7-40 residual current circuit breaker is in conformity with the standards of IEC61008.It can cut off the fault circuit immediately on the occasion of shock hazard or earth leakage of trunkline.Thus it is suitable to avoid the shock hazard and fire caused by earth leakage.It can be used in circuits up to single phase 240V,three phase 440V,50 or 60Hz.
Description
Residual Current Circuit Breaker with Over Current Protection is
used to protect against electrical leakage in the circuit of
50/60Hz, rated voltage 230/400V,rated current up to 40A.
When electirc shock happens or the residual current more than the
fixed value, the RCCB can cut off the power within 0.1s
automatically protecting the personal safety and preventing the
equipement from the fault resulted from the residual current.
So the RCCB can protect the circuit against overload, short circuit
and electrical leakage
| Standard | IEC/EN 61009-1 | ||
| Electrical features | Rated current In | A | 1,2,4,6,10,16,20,25,32,40,50,63 |
| Poles | P | 1p+N,3p+N | |
| Rated voltage Ue | V | AC 230/400 | |
| Insulation voltage Ui | V | 500 | |
| Rated frequency | Hz | 50/60 | |
| Rated breaking capacity | A | 3000,4500,6000 | |
| Rated impulse withstand voltage(1.2/50)Uimp | V | 4000 | |
| Dielectric test voltage at ind.Freq.for 1 min | Kv | 2 | |
| Pollution degree | 2 | ||
| Thermo-magnetic release characteristic | B,C,D | ||
| Mechanical features | Electrical life | t | 4000 |
| Mechanical life | t | 10000 | |
| Protection degree | IP20 | ||
| Reference temperature for setting of thermal element | ℃ | 30 | |
| Ambient temperature (with daily average ≤35℃) | ℃ | -5~+40(Special application please refer to temperature compensation correction) | |
| Storage temperature | ℃ | -25~+70 | |
| Installation | Terminal connection type | Cable/Pin-type busbar | |
| Terminal size top/bottom for cable | mm2 | 25 | |
| AWG | 18-3 | ||
| Therminal size top/bottom for busbar | mm2 | 25 | |
| AWG | 18-3 | ||
| Tightening torque | N*m | 2 | |
| In-lbs | 18 | ||
| Mounting | on DDIN rail EN 60715(35mm)by means of fast clip device | ||
| Connection | From top and bottom |
| Our Services: |
| 1. Competitive price |
| 2. Continuance Service and support |
| 3. Good-after service |
| 4. Quality Reliability and Long Product Life. |
