Pink Disposable Iv Cannula 20G Butterfly Type Positive Pressure Emergency Infusion Blood Transfusion

20G Butterfly Positive Pressure Type Disposable Iv Cannula Emergency Infusion/Blood Transfusion Pink

Positive pressure connector realizes needle-free connection to avoid occupational risk for medical staff. Positive pressure function can avoid blood backflow, prevent blockage and ensure safe retention

Indwelling needles are left in the foot:

(1) Do not walk on the foot with the needle in place as much as possible;

(2) Put clothes or soft pads between the legs to separate the feet when sleeping to prevent the child's feet from stirring off the needles;

(3) Elevate the limb with the indwelling needle slightly by 20 to 30 degrees when sleeping to prevent back bleeding.

Butterfly Positive Pressure Type Disposable Iv Cannula

Product Registration Certificate No.: National Machinery Note Approval 20153151737

divided into two types, Y-A and Y-AZ.

Hands with indwelling needles should not be immersed in water, and when washing hands, avoid the area covered by the indwelling needle patch;

Put a sock on the hand with the indwelling needle after the infusion (turn the sock over when you put it on, because there are threads inside the sock) to prevent the child from tearing off the needle when playing.

Instructions for use:

1. medical personnel should check the package strictly according to aseptic operation, and remove the product if it is well sealed and not broken;

2. tighten the heparin cap (if any), remove the protective cap and connect directly to the outer luer connector to drain the gas;

3. medical personnel rotate and loosen the needle tip protection sleeve, pinch the catheter holder with one hand, turn the needle handle slightly from side to side with the other hand, and then reset it to prevent needle adhesion;

4. hold the needle holder flap so that the syringe blade is facing upward at an angle of 15-30 degrees, puncture the vein straight and feed the needle slowly;

5. carefully observe the return of blood at the lateral hole of the needle core, depress the angle after seeing the return of blood, continue to enter the needle for 2 mm, hold the catheter holder in the left hand and withdraw the steel core about 5 mm with the right hand;

6. Hold the needle holder and feed the steel needle core and catheter together all into the vessel, and withdraw the steel needle core. Do not re-insert the steel needle into the catheter to avoid damage to the catheter. Put the withdrawn steel needle into the special apparatus;

7. Adjust the infusion flow rate by applying a transparent dressing.

--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Q: Where is your factory located? How can I visit there?

A: Our factory is in Wuzhong District, Suzhou City, Jiangsu Province, and all our customers, both domestic and foreign, are warmly welcome to visit our factory

Q: Are you a factory or a trading company?

A: We are a large factory integrating R&D, production and sales.

Q: When can I get the price?

A: Normally, we quote within 24 hours after we receive your inquiry.

Q: Can you do OEM?

A: Yes, we do OEM, ODM and R&D. We can process products according to the different needs of our customers.

Q: What is the delivery time?

A: According to the order quantity, it needs to be negotiated.

Q:If I want to order a small quantity, can you do it?

A: If you need products that we have in stock, that would be great and you can choose goods that are in stock.We can put your order together with our other customers' orders for production. But this will require some waiting time.

Q:How will you track my order?

A:When the goods start production, we will take photos of the goods and send them to you, if you find any production,defects, please contact us to correct it. Throughout the production process, we will keep in touch with you via email or instantinformation and you can get the latest news about your order. After the goods are completed, we will take pictures of the goods and pack

to you before shipping.

Q: How can I get a sample?

A: Please pay the sample cost and courier fee before we receive your first order. We will return the sample cost to you on your first order.

Q: Can you brand the products with our brand?

A: Some products can. We can put your Logo on the products and packaging if you can meet our MOQ.

Q: Can you make products in our colors?

A: Yes, the color of the product can be customized if you can meet our MOQ.

Q: How do you guarantee the quality of your products?

A:

1) Strict testing during the production process.

2) Strict sampling inspection of products before shipment, and make sure the products are well packed.