1/4'' Malleable Iron Beam Clamp US Standard ELectro Galvanized

1/4-20 Malleable Iron Beam Clamp 5/8" Thread Rod US Standard Hot Dip Glavanisied

Specifications:

• Material: Malleable & S.G.Iron
• Finish: Galvanized
• Thread Size: M10 & M8
• Code: ax2000

1. Design loads only apply to Unistrut brand products. Look for "axwill" on the part.
2. Safety factor = 2.5 based on ultimate strength of connection.
3. Set Screw Installation Torque: 60 in-lbs (7 N-m)

Standard Dimensions (Unless Shown Otherwise on Drawing):

• Hole Diameter: 9/16" (14mm)
• Hole Spacing (From End): 13/16" (21mm)
• Hole Spacing (On-Center): 1 7/8" (48mm)
• Width: 1 5/8" (41mm)
• Thickness:

• 1/4" (6.4mm) with steel meeting or exceeding ASTM A1011 SS GR 33, or
• 0.220" (5.6mm) with steel meeting or exceeding ASTM A1011 HSLAS GR 45

Materials & Finishes - Standard:

• Base Metal: Steel conforms to ASTM A1011 SS GR 33, A1011 HSLAS GR 45, A36, A575, A576, or A635.
• Electrogalvanized (EG): Conforms to ASTM B633, Type III SC1
• Unistrut Defender (DF): Conforms to ASTM A1059
• Hot Dip Galvanized (HG): Conforms to ASTM A123 or A153
• Perma-Green (GR): Conforms to commercial standards for powder coating
• Perma-Gold (ZD): Conforms to ASTM B633, Type II SC1
• Plain (PL): No finish

Materials & Finishes - Special Metals:

• Stainless Steel, Type 304 (SS): Conforms to ASTM A240 or A276, Type 304 *
• Stainless Steel, Type 316 (ST): Conforms to ASTM A240 or A276, Type 316 *
• Aluminum (AL): Conforms to ASTM B209, Type 1100F or 5052-H32 *

Note:

• When used for mechanical supports, load capacities of brackets and fittings should be in compliance with the American Standard Code for Pressure Piping.

UL File No.: E469927

Fits beam flanges thru 1/2" thick
accepts S hooks
1/4" and 3/8" threaded rod 1/4"-20 or #10-24 threaded bridle rings
Supports conduit and electrical box

General:

1) Malleable iron beam clamp for strut channel

2)  With CNC machine threading NPT thread

3)  As for the thread rod hanger on the strut channel

4)  UL stipulated:all the sizes need to be using corresponding item code when we appliedd the UL, C/W screw and steel locknut,come with the hot-gal.lock ring

5) All ranlic malleable beam clamp are electro-galvanized

Applications:

Ranlic Malleable beam clamps are used when drop-rod length must be adjusted to accommodate the field installation finished height.

Other Name:

Pipe fitters beam clamps, reversible beam clamps, top beam clamps, wide mouth beam clamps, fitters clamps, plumbers clamps.

Charactics & Dimension:

You may choose following RanLic other Conduit products:

EMT CONDUIT PIPE

IMC CONDUIT PIPE

RIGID CONDUIT PIPE

FLEXIBLE CONDUIT PIPE

LIQUID TIGHT FLEXIBLE CONDUIT

EMT connector(steel,zinc),

emt coupling(steel,zinc),

compression emt connector,

Compression emt coupling,

Squeez flexible connector(straight and angle),

Liquid tight connector(straight and angle),  

Water tight hub

Romex connector

Conduit bushing

Service entrance cap

EMTstraps(one and two holes) 

Strut clamp(for emt imc and rigid)

Beam clamp, emt elbow

Conduit hanger

Steel outlet box

EMT/IMC/RIGID conduit body

IMC/RIGID coupling,

steel and zinc locknut

emt imc rigid elbows 

Clevis hangers

Springier hanger

conduit nipple

water proof terminal box,etc

Advantage:

Ranlic mounting holes are fully threaded through the body allowing drop rod length adjustment. Their hardened cup point set screws come with jam nuts to prevent vibratory loosening in industrial settings. Additionally, clamps come in both short or wide jaw openings for various beam flange thickness.

Why Choose Ranlic Conduit Item:

1) High quality material ensures a finish conduit and fittings with superior properties
2) Manufactured by perfect molds and professtional engineer
3) Fitted perfectly with fittings(conduits) for the CNC threading machine
4) 10 years export experience to make sure the perfect shipment date and package
5) Always like to listening customers feedback for the conduit arrived to 
   customer's warehouse to improving our service 

Our Package: