5by5 Welded Steel Electrical Box 1.60mm Thickness Hot Dip Coil With
Universal Knockouts
Designed for use with rigid/IMC and EMT conduit, these 5" steel
boxes are suitable for audio, video, data and power applications in
healthcare, education, commercial and government facilities.
Design features
- Large cubic capacity: 67 cubic inches
- Various knockout combinations and grounding terminations
- Application-specific color options are available – red (fire signal
applications) and blue (telecommunications)
- 5" square series adapter plate (AX5CP) accommodates the use of
readily available 4" square box covers, mud rings and tile rings
5-Gang Box, Welded, 2-1/2 in. Deep, Eight 3/4 & 1 in.
Concentric KO's, Six 1/2 in. KO's, and Ten 3/4 in. KO's
- Gang boxes save time in installation, no need to gang boxes
together.
- Have 3/4" and 1" concentric KO's for use with a wide variety of
wiring methods.
- Bottom KO pattern, 3-1/2" and 2-3/4" at either end of box.
- Accepts two styles of covers, flat and 3/4" raised device cover.
- Use low voltage partitions #947 or #949.
0.8mm wall thick | 1/2" HIGHT, HOT DIP GALVANIZED STEEL COIL |
1.0mm wall thick | 1/2" HIGHT, HOT DIP GALVANIZED STEEL COIL |
1.2mm wall thick | 1/2" HIGHT, HOT DIP GALVANIZED STEEL COIL |
1.5mm wall thick | 1/2" HIGHT, HOT DIP GALVANIZED STEEL COIL |
0.8mm wall thick | 1/2" HIGHT, HOT DIP GALVANIZED STEEL COIL |
1.0mm wall thick | 1/2" HIGHT, HOT DIP GALVANIZED STEEL COIL |
1.2mm wall thick | 1/2" HIGHT, HOT DIP GALVANIZED STEEL COIL |
1.5mm wall thick | 1/2" HIGHT, HOT DIP GALVANIZED STEEL COIL |
Electrical 1.60mm Multi-Using Cover Conduit Junction Box Pre
Galvanized Telescoping 1/2"D
Electrical 1.60mm Cover Conduit Junction Box Pre Galvanized One Two
Gang 5/8" Deep
Electrical Conduit Box Cover Heavy Duty 1.60mm Cover With Screws
Ruff-IN Plate Brackets & Wall stud
Electrical 1.60mm Multi-Using Cover Conduit Junction Box Pre
Galvanized One Two Gang 1/2" Deep
Increase strength and rigidity help withstand the stress of stress
of drywall installation
Assemblies shipped with box installed on left side of brackets,
unless othersie specified
The wall stud improved far-side support stands up during
drywall,installation and out performs competitor brackets
16" STUD SPACING | come with stop plate |
24" STUD SPACING | sleeve extender |
Self Adjustable Pre-fab Ring | protective plate box plate |
Installation steps:
- Install Bar hangers on ceiling joists or wall studs by screws.
- Take off screw from stud on bar hanger, installs in 1/2” knockouts
located on the bottom of boxes.
- All above 5 Bar hangers are installed with metallic boxes on wall
studs or ceiling joists.
- When intended to support a fixture/luminaire in a wall, load
capacity is 6 kg (13 Ib).
Application: These wall support brackets are used to support
electrical boxes from floor or concrete forms.
They also help prevent electrical boxes from being pushed back into
the wall cavity during drywall installation.
Advantages: fold back stabilizers ensure an easy and secure
electrical box installation in wall applications. They are designed
to mount square boxes on walls 12”to 24” above the floor. floor and
wall kick plate support brackets have box screws that are exposed
after mounting so the conduits can be secured from the front of the
box opening. Additionally, their multiple heights accommodate a
variety of fnished floor heights.
Application: These multi-box mounting brackets are used to secure
conduit boxes in stud walls.
Advantages: Multi box mounting brackets allow the installer to
quickly and easily mount 4”, 4-11/16” or 6”square conduit boxes in
stud walls.
Application: This box mounting bracket is used to support
electrical box mounted to wood studs.
They screw directly to the face of wood studs.
Pre-Fab RUFF-IN products leave all the troubles in our factory, to
efficiantly and save time for the end user.
Open box mounting bracket
1)Open box support allows for adjustablility of box position
between studs
2) Support most North American boxes and/or plaster rings 4" SQ
4-11/16SQ
5"SQ and multi-gang boxes
3) Fits up to 1-1/2" wide studs 16" &24"on center
4) Compatible with rapid ring & adjustable plaster rings
5) Field cut to adjust to non-standard stud spacings
6) Stamped markings at 1/2" 1/4"and 1" increments to allow the
installer to easily locate the desited box position
7) You may contact us for pre-fab assemblies
8) Bracket accessories require no tools to install
9) Fllor stand ensures consistent box height and eliminates need to
measure for proper install height.
![](http://img.everychina.com/nimg/fc/6a/37363ff4b5af3237c0417a05ede9.jpg)
Alignment plate can be cut on a mark to make shorter length
brackets
Can be used with floor stand
![](http://img.everychina.com/nimg/af/81/072f4e260b0ef5ff5bea63b24576.jpg)
Packaging & Delivery
Packaging Details
1. Skin Packing each products/master ctn
2. Inner ctn,master ctn
3. Each piece one plastic package,master ctn
Port
Shanghai/Ningbo
Lead Time:
20-30 days.
1. Pictures of emt conduit box
2. Descriptions of emt conduit box
1) Using for EMT conduit cover for octangular / square / rectangle box.
2) All using automatic punching machine & molds, precise for each
products.
3) K.O.S can make mixed size or only one size.
4) C/O cover and screws. Can make the bottom side hole as the terminal hole
5) Come without terminal brass part unless ordered, can be make one
or two adjustable lug, thickness from 0.60mm to 1.60mm.