|
[China]
Trade Verify
Address: NO.61 Xiachen'an Road,Xiwu Street,Fenghua District,Ningbo,China.315505
Contact name:Peter
Ningbo Suntech Power Machinery Tools Co.,Ltd. |
|
Verified Suppliers
|
|
|
Unpowered Cable Identification Tester, Cable Identifier , High Voltage Cable Phase Sequence Identification
I. Product introduction
The S180 Cable Identifier is designed for power cable engineers and cable workers to solve technical problems with cable identification. The user can accurately identify one of the target cables from multiple cables through the instrument, and avoid accidentally sawing the live cable and causing serious accidents. Cable identification begins with the operation at both ends of the cable and must ensure that the double numbers on both ends of the cable are accurate. No matter how reliable the memory of the field staff is, it is not a substitute for the identification of professional instruments. This product is only suitable for on-site identification of cables that have been powered off. It is strictly forbidden to connect the cable identifier to the running power cable! The instrument consists of a transmitter, a receiver, and a flexible current clamp.
The transmitter uses the pulse current principle to inject a pulse current signal into the cable core. This current generates an electromagnetic field around the target cable for detection and identification by the receiver and the flexible current clamp. Since the current is directional, the detection is also directional. The transmitter adopts an integrated special toolbox design, using polypropylene plastic as raw material, adding a new composite filler into one injection molding, which has small density, strength, rigidity, hardness, wear resistance, heat resistance and insulation performance. The cabinet can withstand a pressure of about 200kg, and the host large LCD displays the remaining battery power in real time, and the white backlight and the dynamic signal of the transmitting signal are clear at a glance.
The receiver is a handheld device with a 3.5-inch color LCD screen that dynamically displays current relevant information. Built-in high-speed microprocessor, real-time automatic detection and identification of target cable; with AC voltage detection function, range AC 0.01V ~ 600V (50Hz / 60Hz).
The flexible current clamp is a Rockwell coil with excellent transient tracking capability to quickly identify the pulse current generated by the transmitter for thick cables or irregularly shaped conductors. The inner diameter of the jaw is about 200mm, and the cable of φ200mm or less can be clamped. It is not necessary to disconnect the line to be tested, non-contact measurement, safe and fast.
Special note: According to the design principle of this instrument, the cable identifier is limited to the cable whose target cable is power failure. Please confirm that the target cable belongs to this range before use. When identifying, you need to use both the transmitter and the handheld receiver of the instrument.
II. Product Principle
III. Technical Features
1．Benchmark conditions and working conditions
| Content | Benchmark condition | Working conditions |
| Ambient temperature | 23℃±1℃ | -10℃～40℃ |
| Environmental wet | 40%～60% | ＜80% |
| Measured voltage frequency | 50Hz±1Hz | 10Hz～1000Hz |
Receiver operating voltage
| 7.4V±0.5V | 7.4V±1V |
| Transmitter operating voltage | 11.1V±0.7V | 11.1V±1.5V |
| External electric field, magnetic field | Should be avoided | |
| Cable position to be tested | The cable under test is at the approximate geometric center of the jaw | |
2.Transmitter specification
| Functions | Generate current pulse signal; display remaining battery voltage |
| Power supply | DC 12.6V large capacity rechargeable lithium battery, DC charging interface, fully charged for about 8 hours of continuous operation |
| Display mode | Large LCD displays remaining battery voltage, white backlight |
| Pulse voltage | 500V |
| Pulse current | Max. 30A (depending on the value of the loop resistance) |
| Pulse frequency | 40 times / minute
|
| Pulse Width | 2ms |
| Test line length | 3m |
| Operating temperature | -25～60℃ |
| Storage condition | -20℃~50℃,≤95％RH, no condensation |
| Dimension | 320mm×275mm×145mm |
| Weight | 2.5kg |
| battery power | Remind the battery when the battery voltage is lower than 9.5V |
| Insulation | ≥100MΩ between the instrument line and the sheath casing |
| Adopts standard | IEC61010-1 CAT Ⅲ 600V,IEC61010-031,IEC61326 |
3.Receiver specification
| Usage | Detect current pulse signal; measure AC voltage |
| Power supply | DC 7.4V large capacity rechargeable lithium battery, USB charging interface, fully charged for about 8 hours of continuous operation |
| Rated current | About 180mA max |
| Display mode | 3.5-inch true color LCD display, dynamic display signal strength |
| Dimension | Host machine:207mm×101mm×45mm |
| Flexible current clamp: wire diameter is about 12.5mm | |
| Coil inner diameter of Flexible current clamp | φ200mm |
Line length
| Flexible coil lead length: 2m |
| Voltage test chart pen length: 1m (one for each black and red) | |
| Detecting range | The coil can detect a pulse signal with a loop resistance of 0 Ω to 2 kΩ. |
| Voltage testing range | AC 0.01V～600V(50Hz/60Hz) |
| Voltage testing accuracy | ±1%±1dgt |
| Detection rate | About 1 second / time |
| Gain adjustment | Level 5, press the left and right arrow keys to adjust the signal magnification |
| LCD brightness | Press the up and down arrow keys to adjust the brightness of the LCD backlight |
| Automatic shut-down | After about 15 minutes of power on, the meter automatically shuts down to reduce battery consumption. |
| battery voltage | When the battery voltage is lower than 6.5V, the battery voltage is low and the symbol is displayed to remind the battery to charge. |
| Working temperature and humidity | -10 ° C ~ 40 ° C; below 80% Rh |
| Storage temperature and humidity | -10℃～60℃；below 70% Rh |
| Weight | Host machine:370g(with battery) |
| Current clamp:172g | |
| Insulation | ≥100MΩ between the instrument line and the sheath casing |
| Adopts standard | IEC61010-1 CAT Ⅲ 600V,IEC61010-031,IEC61326 |
IV. Composition
Transmitter 1 set
Receiver sensor 1 set
Toolkit 1 set
Test line 2 pcs (red and black)
Flexible current clamp 1 pcs
9V USB charger,charging cable 1 set
12.6V charger 1 pcs
7.4V lithium battery 1 group (inside the tester)
11.1V lithium battery 1 group (inside the tester)
Manual, warranty card, certificate 1 set
