Transit 6cbm Truck Mounted Concrete Mixer, Low Angle Cement Delivery Trucks

Hot Sale Sinotruck 6m3 8m3 Concrete MixerTruck for Sale 

Introduction of concrete mixer truck of medium size 6m3 and 8m3

Concrete mixer truck for volume 6m3 and 8m3 can automatically feed, measure, mix and discharge concrete mixture. Equipped with a powerful engine and 4 wheel steering, the operator can drive it to where it needs to go. It is very convenient for loading material, such as cement, aggregate and stone.Chunyue supplies all construction line from concrete batching plant to concrete mixer truck,welcome for inquiry!

6CBM self loading concrete mixer truck for ready mix transporter is the special purpose vehicle to keep mixing the concrete while transporting the concrete or in the construction site to maintain the concrete consistent, prevent the initial setting and separation during the transportation, ensure the pouring quality and reduce the concrete loss.

Parameters of Self-loading Concrete Mixer Truck with Mixing Tank 6m3 and 8m3

Features of Concrete Mixer Truck of 6CBM and 8CBM

1. Fully integrated into the customer personalized demand and user-friendly design concept,which is the high-end products of the concrete mixing transportation equipment.

2. Strong Power, low fuel consumption, strong climbing ability;Strong flexibility and applicability,lower unloading residual rate,large volume,high efficiency.

3. Mixing body and leaf are all made from special fine grain wear plate,Integral forging raceway,which all can guarantee longer&enough life-span.
 

4. Mixing leaf has the excellent mixing function to make the finished concrete more uniformly,and to maintain the quality of the concrete;High strength,toughness beam, minimizing vibration.
 

5. The fourth axle adpoting American patented technical air suspension,can freely lift and down the lifting axle according to the weight and road environment.

Structural Analysis

Chassis
 

There are a lot of chassis in the mixer, such as HOWO, CAMC, FOTON, Dongfeng, etc.The small square mixer adopts the driving mode of 4X2, which is the driving mode of the larger mixing vehicle, 6X4 and 8X4.
 

Auxiliary frame
It is mainly composed of main beam, front part and back part, which plays the role of connecting the chassis girder and supporting the mixing drum.
 

Cleaning system
It mainly consists of water tank, air pressure gauge, valve and pipeline.The main function is to clean the mixing drum, and the cleaning system also has a cooling effect on the hydraulic system.
 

Hydraulic system
he engine driven by the extractor is converted into hydraulic energy, and then the motor output is mechanical energy, and the reducer drives the mixing drum to rotate.
 

Mixing drum
The most important part of the vehicle, most of the mixing drum USES a light tone.The mixing drum is loaded with concrete containers. The inner wall of the cylinder is filled with spiral blades, and the concrete is inseparable from the blade in the process of stirring and moving in and out.
 

Row by Row
It is located at the rear of the car, which is composed of feeding hopper, hopper, main discharge chute, auxiliary discharge chute and bracket locking rod.