Fiberglass Screw Compressor Air Oil Separator 39863857

Fiberglass Screw Compressor Air Oil Separator 39863857

Product description:

Ingersoll Rand Air Compressor Oil Separator: Ingersoll Rand Air Compressor Oil Separator is a key component that determines the compressed air quality of Ingersoll Rand Air Compressor. A high-quality oil separator can not only ensure the efficient operation of the compressor , And the life of the filter element can reach thousands of hours.

The function of Ingersoll Rand oil separator:

Oil separator: According to the working principle of the screw air compressor, we know that the air that has just been compressed contains a lot of oil molecules, and the main function of the oil and gas separator filter element is to separate the oil and gas. The separated compressed air enters the next stage, and the oil droplets will be concentrated at the bottom of the filter element and returned to the lubrication system through the oil return pipe.

Ingersoll Rand oil separator maintenance:

Maintenance of the oil separator: The oil separator is a component that separates the screw lubricating oil from the compressed air. Under normal operation, the service life of the oil and gas separator is about 3000 hours, but the quality of the lubricating oil and the filtering accuracy of the air affect its life. Have a huge impact. It can be seen that the maintenance and replacement cycle of the air filter element must be shortened in the harsh environment, and even the installation of a pre-air filter is considered. The oil separator must be replaced when it expires or the pressure difference between the front and back exceeds 0.12Mpa. Otherwise, the motor will be overloaded, the oil separator will be damaged and the oil will run out.

Cross Reference:

Product parameter:

Technical parameters:

1.The filtration accuracy is 0.1μm.

2.The oil content of compressed air can reach below 3ppm.

3.The filtration efficiency is 99.99%.

4.The service life can reach 4000-6000h.

5.Initial pressure difference: ≤0.02MPa.

The filter material is made of glass fiber from American HV (Binzer) Company and American Lydall Company.

If you don't find the part number you want in my online shop, please do not hesitate to contact us, Maybe I can check it for you. At the same time, we are a factory and can also customize unconventional filter elements for you at any time.