Kobelco Screw Compressor Oil Separator Replacement P-CE03-572

Kobelco Replacement P-CE03-572 Screw Compressor Air Oil Separator

One failure is the rupture of an oil and gas separator.Performance is that the oil in the screw air compressor is taken away by compressed air, the drain pipe of the pipe filter is filled with oil, the screw air compressor oil level is reduced, and it is forced to emergency stop for replacement.From the fault point of view, because the oil and gas separator used is dirty, the penetration resistance of compressed air is added and the pressure is increased during the oil and gas separation, which finally leads to the rupture of the oil and gas separator.

Screw or sliding vane air compressor and other oil injection, oil drop lubrication air compressor, oil channel, oil cost is severe, it is likely that the oil and gas separator filter element has failed or damaged, commonly known as fly oil, may need to replace the oil and gas separator filter element, the relevant position of seals such as O-ring, gaskets, etc.There is also a possibility that the oil filter or valve is blocked and the pipeline is damaged. The oil after separation can not return to the suction end, resulting in the loss of lubricating oil.

AIR OIL SEPARATOR — SEPARATES THE OIL FROM THE COMPRESSED AIR

Features

1. Low pressure drop and energy saving

2. High quality filtration media
3. Low oil consumption
4. Reliable and stable
5. Compact design
6. Long life span