Fiberglass Screw Compressor Air Oil Separator 54595442

Ingersoll Rand Screw Compressor Air Oil Separator 54595442
 
Screw air compressor oil separator: 
                                                                                                                                                                                                                              
Screw air compressor oil air separator is normal work, affect the air compressor system output is pure available.Air compressor in the use of the process to replace the oil separator in time, a general time for 3000- 5000 hours, this should be adjusted according to the merits of the use environment.
Product Features:
 
We choose the most advanced antiseptic high-efficiency superfine fiber agglomeration materials as our main filtration, which is composed of pre filter layer, superfine fiber layer, supporting layer, gravity layer, etc. It can filter all solid particles which are bigger than 3μm, while for very tiny oil-gas dissolutions (about 0.01-1μm), when filtered, they agglomerate into big oil drops at the bottom, and then returned to lubrication system through siphon by oil return pipe in order to make compressor expel cleaner and oilless compressed air.
 

 
 
The pressure cannot rise or rise to a certain level and then it cannot rise again:
 
Cause of issue:
 
1.The safety valve leaks.
2.The screw hole leaks.
3.Piston ring leaks.
4.The cylinder head asbestos rubber gasket is broken or uneven.
5.Leakage of exhaust or drain valve.
 
Troubleshooting method:
 
1.Dismantle or replace the safety valve.
2.Tighten the screw or flatten the gasket before pinning.
3.Replace the piston ring.
4.Replace asbestos rubber sheet.
5.Replace the exhaust valve group and drain valve