FR3 Vegetable / Mineral Oil Immersed Transformer Manufacturer 3 Phases220KV 20 ~ 400MVA

220KV 20 ~ 400MVA Oil Immersed Transformer Manufacturer 3 Phases

220kV-252kV Power Transformer
NINGBO TIANAN (GROUP) CO., LTD.
1. Product standards
>> GB1094.1 ~ 2-1996.
>> GB1094.3, 5-1985.
>> GB/T6451-1995.
>> IEC60076.
2. Low loss
- Optimization of electromagnetic calculations, using combined technology of electrical shielding
and magnetic circuit, effectively controlled leakage, so as to reduce the load loss and to avoid
partial overheating.
- Use high quality cold-rolled lattice orientation high permeability silicon steel, to reduce the load loss,
no-load current.
- Core all-helical stacking with STEP joints, and advanced stacking process, reduced the load loss, load
current and electromagnetic noise.
3. Low partial discharge
To ensure the safe and steady operation of the transformer under continuous rated voltage, our Electric Power Research Institute conducted a lot of research to develop a more reasonable insulation structure, plus the strict technology specifications and technical staff experience, ensured the low partial discharge of our products.
4. High strength
- Adoption of six-side method positioning for the body, meets the transportation requirements of, horizontal acceleration not more than 0.3G, vertical direction not greater than 0.15g.
- Upper and Lower Clamps and the formation of tight fixed side beam frame.
- The tank can withstand the vacuum test and required positive pressure test.
5. Low Noise
- Use of high-quality core silicon steel;
- Core STEP stepping joints;
- Reduction of the flux density, despite of the increase of cost;
- Use low-noise fan as the air cooling equipment;
- Increase the shock absorbing measures;
- Well interior-protection, to avoid direct rigid contact of the body and tank;
6. Maintenance-free
Our company adopts the domestic leading technology, use fully enclosed structure for the transformer tank, ensuring product life of 30 years, and maintenance-free operation.
 
Reference Technical specification:
 
220kV ,31500kVA~180000kVA three-phase, two windings,
on-load voltage regulation power transformer:
 

 
Three- Phase Three-Winding On-Load Voltage Regulating Auto Power Transformer

****For detailed technical specifications, please contact us.