Home Companies Ningbo Tianan (Group) Co.,Ltd.

10KV Fully Enclosed oil immersed Transformer Prefabrication Substation

Ningbo Tianan (Group) Co.,Ltd.

Contact Us

[China] country

Trade Verify

Address: 3/F, Building B7 , 999 Yangfan Road,High-tech Zone, Ningbo, China 315040

Contact name:Lian Huanhuan

Inquir Now

Ningbo Tianan (Group) Co.,Ltd.

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

10KV Fully Enclosed oil immersed Transformer Prefabrication Substation

Country/Region china
City & Province ningbo zhejiang
InquireNow

Product Details

10KV Fully Enclosed oil immersed Transformer Prefabrication Substation

Product Description

 

1. ZGSll Combined Transformer is researched by ourselves on the basis of absorbing the technology

    of American transformer, it also is named American Substation.

2. The capacity range is 200-1000kVA, it is suitable for neutral point insulated system or grounded        

    system through small resistance for 10 kV distribution network, but 400V system is three phase four

    wiring system with neutral point solidly ground.

3. It has strong whole set, reliable power supply, small volume, low weight, and low noise. It has ring

    network type and terminal type cable outgoing line.

4. When the product is used, the load of 10kV power grid can reach to the load center. Circuit loss can

     be reduced, the reliability of power supply can be improved, and city environment can be beautified.

     It is suitable for city network transformation.

 

 

Mainly Features

a. Compared with”9” type transformer, no-load loss reduces 30.12%, annual operating cost reduces

    20.03% equally, and the product has lower noise. Consequently, it is environment friendly.

b. Full sealed oil tank is used to accommodate the body, HV load switch( or HV load change over switch),

     fuse, no-excitation tap changer and so on, which improves utility rate of space. The volume is about    

     1/3 of combined substation who has the same voltage level and capacity, and the weight is much

      lower.

c. HV room is isolated with LV room, two rooms adopt interlocks respectively. The door of HV room can

    be opened only when the door of LV room is opened. HV terminals is insulated completely, safety is

    fine.

d. Adopt full range protection of combined two classes fuse (back-up current-limiting fuse, plug-in fuse), it

    has the advantages of safety, reliability, flexible operation and convenience for replacing fuse.

e. Tank is a full sealing structure, and oil is insulated completely, no-leakage, maintenance-free

 

 

Reference Specification:

 

 

Rated Capacity
(KVA)

Voltage CombinationConnection SymbolNo-load loss (W)Load Loss (W)Short-circuit Impedance (%)No-load Current (%)Weight (kg)HV Connection method
HV (KV)Tap
(%)
LV (KV)Total Weight
20010±2×2.50.4Yyn0
or
Yd11
33526004.00.601894Ring Network Type (H)
or
Terminal Type (Z)
25039030500.502060
31546536500.452148
40056043000.402375
50067051000.402603
63084062004.50.402826
80098075000.403357
10001190103000.303704

 

Hot Products

20KV Electrical Distribution Step Down Dry Type Electrical Transformers Basic Info. Model NO.: SG (H...
Insulating Non-encapsulated Environmental Cast Resin Dry Type Transformer Overview: Insulating Non...
35KV Transformer Station Resin Insulation Dry - Type Power Transformer Overview SCB series resin ...
35KV Transformer Station Resin Insulation Dry - Type Power Transformer Overview This product adopts ...
6 ~ 35 KV / 30 ~ 2500 KVA Resin Casting Dry Type Distribution Transformer ​ General: As the ...
30 ~ 2500 KVA Thin - Insulation Resin Cast Dry Type Power Transformer General: 10 KV grade SCB10, ...