Model XR70CX, format 32x74mm, is microprocessor based controller,
suitable for applications on medium or low temperature ventilated
refrigerating units.
It has four relay outputs to controlcompressor, fan, and defrost,
which can be either electrical or reverse cycle (hot gas). The last
one can be used as light, for alarm signalling or as auxiliary
output.
It is also provided with up to 4 NTC or PTC probe inputs, the first
one for temperature control, the second one, to be located onto the
evaporator, to control the defrost termination temperature and to
managed the fan. The digital input
can operate as third temperature probe. The fourth one, to connect
to the HOT KEY terminals, is used to signal the condenser
temperature alarm or to display another temperature.
The HOT-KEY output allows to connect the unit, by means of the
external module XJ485-CX, to a network line ModBUS-RTU compatible
such as the Dixell monitoring units of X-WEB family.
It allows to program the controller by means the HOT-KEY
programming keyboard. The instrument is fully configurable through
special parameters that can be easily programmed through the
keyboard.