|
[China]
Trade Verify
Address: No. 1199, Xiyuan Road, Economic Development Zone, Qidong City, Jiangsu Province, China.
Contact name:Karin
Dhh Compressor Jiangsu Co., Ltd |
|
Verified Suppliers
|
|
|
20hp15kW Combined Rotary Screw Air compressor Integrated Fiber Cutting Air-Compressors
Pressure differentiation of integrated screw air compressor
1. High pressure series
(1) The appearance is integrated, with air tank and air dryer
(2) The pressure range is 16bar (232psi) -30bar (435psi)
(3) Divided into fixed speed and permanent magnet frequency
conversion series
2. Ordinary pressure series
(1) The appearance is integrated, with air tank and air dryer
(2) The pressure range is 7bar (101.5psi) -13bar (188.5psi)
(3) Divided into fixed speed and permanent magnet frequency
conversion series
Advantages of integrated screw air compressor
1. Fewer parts and connections, reducing the possibility of unit
failure and leakage. Reduce the integrated piping system and
greatly reduce the pressure loss.
Directly eliminate the dry compressed air, fully guarantee the air
quality of the user terminal.
2. High reliability, fewer parts and no wearing parts, so it runs reliably, has a long life, and the interval between overhauls can reach 40,000 to 80,000 hours.
3. Convenient operation and maintenance. The screw compressor has a high degree of automation, and the operator does not need to go through long professional training, and can realize unattended operation.
4. Strong adaptability. The screw compressor has the characteristics of forced air delivery, the volume flow is almost not affected by the exhaust pressure, and it can maintain high efficiency in a wide range. It is suitable for a variety of working conditions without any changes to the compressor structure.
| Model | CPBZY15 |
| Type | Fixed air-cooled twin-screw air compressor |
| Dimensions | 1882×790×1732mm |
| Installation method | Fixed installation without foundation |
| Rated displacement | 1.51m3/min |
| Rated exhaust pressure | 1.58Mpa |
| Exhaust oil content | ≤0.003 ppm |
| Exhaust pressure dew point | 2~10°C |
| Compression stages | Single-stage |
| Transfer method | belt |
| Compression oil consumption | 8L |
| Cooling method | Air cooling |
| Cooling air volume | 3500 m3/h |
| Ambient temperature | 0 ~ 45°C |
| Noise | ≤65 dB |
| Weight | 560kg |
Notes:1. A represents air-cooling type,W represents water-cooling
type;
2. Working Environment temperature: -5ºC~45ºC;
3. Discharge temperature is less than ambient temperature
+10ºC~15ºC;
4. Drive Mode: belt driven;
5. Startup Mode: direct start under 11kw, and above 11kw;
6. Work Power: 380V / 50HZ, 460V / 230V / 6KV and 10KV voltages can
be made for customers;
7. F.A.D volume flow test is according to ASMC PTC9 or ISO1217
standard (GB/T3853)
