|
[China]
Trade Verify
Address: No. 1199, Xiyuan Road, Economic Development Zone, Qidong City, Jiangsu Province, China.
Contact name:Karin
Dhh Compressor Jiangsu Co., Ltd |
|
Verified Suppliers
|
|
|
Energy-Saving Industrial Electric Air Cooling Double Screw Type Air Compressor
Two-stage compression energy saving principle:
Oil-injected screw air compressors use two-stage compression to improve the energy efficiency of the compressor. The two-stage compression screw main engine adopts two-stage segmented compression, namely the first-stage compression and the second-stage compression. After the first-stage compression, the oil and gas can be fully mixed between the stages to reduce the suction temperature of the second-stage compression, thereby reducing power consumption.
The double-stage compression main engine reduces the compression ratio of each stage, reduces the internal leakage, improves the volumetric efficiency, reduces the bearing load, and improves the life of the main engine.
●Double-stage compression replaces single-stage compression, the exhaust volume is increased by nearly 15%, and the energy saving effect of up to 15% can be achieved.
The compression ratio of each stage is small, the compression ratio of each stage reduces the bearing load, the leakage is smaller, the volumetric efficiency is high, the vibration is low, and the noise is low.
●Under the same power, the two heads bear the load, the bearing is less stressed and the service life is longer.
Two stage air end
Feature:Two-stage compressor air-end
Advantage:Low compression ratio, Low temperature rising, Low air leakage
Benefit:15% energy-saving
High-efficiency Motor
Feature: IE4 permanent magnet motor/IE4 High-efficiency motor
Advantage:Motor efficiency 97%
Benefit:5% energy-saving
Intelligent control
Feature: VFD system
Advantage:Constant pressure output to remove pressure fluctuation and off-load, Constant temperature output at 9-~85°C, Low starting current to protect components
Benefit:15% energy-saving
Smart display screen
Feature:Intelligent control system
Advantage:10 inch monitor to show all the date
Benefit:Simple operation and touble free
Cooling fan
Feature:Large cooler system
Advantage:Axial flow Fan used for good cooling effect
Benefit:Allow ambient temperature at 52°C
Systematic Design of Oil separator
Feature:Large oil system
Advantage:Reduce internal pressure loss avoid oil, Leakage for safety
Benefit:3% energy-saving
Filter
Feature:Double filtering system
Advantage:Remove impurity from air and cleanness
Benefit:Longer life air -end and lubrication oil
Air inlet valve
Feature:High vacuum degree:700mmHg
Advantage:Large suction area, Low load energy consumption in unloaded operation,
Fast check: prevent unloading and shutdown oil injection
Benefit:Cast aluminum to avoid rust and temperature change
Technical Parameter
1.power frequency
| ODEL | Air flow Capacity (m³/min) | Power (kW) | Noise (DB) | Outlet Diameter | Dimension ( mm) | Weight (Kg) | ||||
| 0.6Mpa | 0.7Mpa | 0.8Mpa | 1.0Mpa | 1.3Mpa | ||||||
| DD-75 | 15.80 | 14.70 | 13.00 | 9.50 | 8.60 | 55 | 70 | DN50 | 2300x1300x1830 | 1534 |
| DD-100 | 18.80 | 17.40 | 15.50 | 12.80 | 10.00 | 75 | 72 | DN50 | 2300x1300x1830 | 1700 |
| DD-125 | 21.30 | 20.70 | 19.50 | 16.50 | 13.00 | 90 | 72 | DN65 | 2550x1630x1850 | 2080 |
| DD-150 | 26.50 | 26.30 | 25.00 | 20.00 | 18.80 | 110 | 72 | DN65 | 2550x1630x1850 | 2120 |
| DD-175 | 34.00 | 32.60 | 30.00 | 24.00 | 20.00 | 132 | 78 | DN80 | 3000x1828x2310 | 4850 |
| DD-220 | 41.00 | 38.00 | 37.00 | 29.60 | 24.50 | 160 | 78 | DN80 | 3000x1828x2310 | 5000 |
| DD-250 | 44.00 | 41.00 | 40.00 | 34.00 | 31.00 | 185 | 78 | DN100 | 3460x1940x2230 | 5900 |
| DD-275 | 48.00 | 44.00 | 45.00 | 40.00 | 33.00 | 200 | 78 | DN100 | 3460x1940x2230 | 6200 |
| DD-275 | 55.00 | 51.00 | 50.00 | 43.00 | 38.00 | 220 | 80 | DN125 | 3860x2130x2380 | 8500 |
| DD-350 | 60.00 | 57.00 | 56.00 | 47.00 | 43.00 | 250 | 80 | DN125 | 3860x2130x2380 | 8650 |
2.Permanent magnet
| Model | Air Delivery (m3/min) | Power (kW) | Noise (Db) | Outlet diameter | Dimension (mm) | Weight (Kg) | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.7Mpa | 0.8Mpa | 1.0Mpa | 1.3Mpa | Length | Width | Height | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| DDM-30 | 4.50 | 4.20 | 3.40 | 2.60 | 22 | 68 | G1 | 1440 | 830 | 1265 | 840 | |||||||||||||||||||||||||||||||||||||||||||||||||||
| DDM-40 | 6.05 | 5.80 | 4.18 | 4.00 | 30 | 68 | G11/2 | 1600 | 940 | 1410 | 950 | |||||||||||||||||||||||||||||||||||||||||||||||||||
| DDM-50 | 7.50 | 6.80 | 6.00 | 4.60 | 37 | 68 | G11/2 | 1600 | 940 | 1410 | 1050 | |||||||||||||||||||||||||||||||||||||||||||||||||||
| DDM-60 | 10.50 | 9.90 | 6.80 | 5.71 | 45 | 72 | G2 | 2000 | 1120 | 1590 | 1560 | |||||||||||||||||||||||||||||||||||||||||||||||||||
| DDM-75 | 13.60 | 12.30 | 10.15 | 7.00 | 55 | 76 | DN50 | 2900 | 1470 | 1625 | 1780 | |||||||||||||||||||||||||||||||||||||||||||||||||||
| DDM-100 | 16.00 | 15.50 | 12.80 | 10.20 | 75 | 76 | DN50 | 2900 | 1470 | 1625 | 2000 | |||||||||||||||||||||||||||||||||||||||||||||||||||
| DDM-125 | 20.70 | 19.50 | 16.15 | 13.20 | 90 | 76 | DN65 | 3400 | 1757 | 1860 | 2700 | |||||||||||||||||||||||||||||||||||||||||||||||||||
| DDM-150 | 24.80 | 24.00 | 20.20 | 15.21 | 110 | 76 | DN65 | 3400 | 1757 | 1860 | 3000 | |||||||||||||||||||||||||||||||||||||||||||||||||||
| DDM-175 | 29.00 | 28.00 | 23.20 | 18.70 | 132 | 78 | DN80 | 3750 | 1900 | 1980 | 4650 | |||||||||||||||||||||||||||||||||||||||||||||||||||
| DDM-220 | 34.00 | 32.50 | 28.00 | 23.10 | 160 | 78 | DN80 | 3750 | 1900 | 1980 | 4850 | |||||||||||||||||||||||||||||||||||||||||||||||||||
| DDM-250 | 39.00 | 38.00 | 32.00 | 27.70 | 185 | 78 | DN100 | 3900 | 2100 | 1980 | 5900 | |||||||||||||||||||||||||||||||||||||||||||||||||||
| DDM-275 | 43.20 | 42.00 | 38.10 | 31.90 | 200 | 78 | DN100 | 3900 | 2100 | 1980 | 6200 | |||||||||||||||||||||||||||||||||||||||||||||||||||
| DDM-300 | 48.51 | 46.20 | 41.20 | 31.60 | 220 | 82 | DN100 | 4260 | 2182 | 2170 | 6200 | |||||||||||||||||||||||||||||||||||||||||||||||||||
| DDM-350 | 52.50 | 51.00 | 45.80 | 37.20 | 250 | 82 | DN100 | 4260 | 2182 | 2170 | 6500 | |||||||||||||||||||||||||||||||||||||||||||||||||||
About us
Dehaha Compressor was founded in 1996 with over 150 skilled employees and more than 25 R&D engineers' teams.We focus on the research & develop, manufacture and energy-saving solutions of screw air compressor to create value for customers and society.
Dehaha opened to the world since 2015, and now we have a foreign trade department with more than dozens people, serving customers around the world 24 hours. We have sales representatives who can speak English, Spanish, Portuguese, French,and Russian which makes it easier for our clients from all over the world to interact and negotiate with us.now our valued customers are over 130 countries. Germany Standard and 13 years exporting experience help us won more than 50 loyal overseas agents.
Our service
1.24/7 after sales service support in different languages.
2.Follow up the feedback of products in 2 months interval by email or call.
3.Guidance of installation and commissioning on site can be provided by factory-trained technicians or local Authorized Service Center.
4.Technical training for customers in DEHAHA air compressor factory or working site.
5.Plenty of original spare parts with proven quality are all available from our central stocks in Jiangsu and all distributors'depots.
6.All kinds of technical documents in different languages.
FAQ
1.Why customer choose us?
DHH SCREW COMPRESSOR JIANGSU CO.,LTD.with 23 years old history,we are specialized in Rotary Screw Air Compressor.Germany Standard and 13 years exporting experience help us won more than 30 loyal foreign agents.We warmly welcome your small trial order for quality or market test.
2.Are you a manufacturer or trading company?
We are professional manufacturer with big modern factory in Qidong,China,with professional design team.Both OEM & ODM service can be accepted.
3.Where is your factory located? How can I visit there?
Our factory is located in Qidong City, Jiangsu Province, China. We can pick up you from Shanghai, it's about 1 hour from Shanghai Pudong Airport to our factory. Warmly welcome to visit us!
4.What's your delivery time?
380V 50HZ we can delivery the goods within 14 days. Other electricity or other color we will delivery within 22 days,if urgently order,pls contact our sales in advance.
5.How long is your air compressor warranty?
One year for the whole machine and two years for screw air end, except consumable spare parts and we can provide some spare parts of the machines
6.How does your factory do regarding quality control?
Quality is everything. we always attach great importance to quality controlling from the very beginning to the very end. Our factory has gained ISO9001:2015 authentication and CE certificate.
7.How long could your air compressor be used?
Generally, more than 10 years.
8. What's payment term?
T/T,L/C,D/P,Western Union,Paypal,Credit Card,and etc.Also we could accept USD, RMB, Euro and other currency.
9.How about your customer service?
24 hours on-line service available.48 hours problem solved promise.
10.How about your after-sales service?
(1) Provide customers with installation and commissioning online instructions.
(2) Well-trained engineers available to overseas service.
(3) Worldwide agents and after service available.
