IN-XK3190-DS3 20mA electronic Floor truck Scale Weight Load Cell Indicator Controller 0.8A DC 12V

Information

proname :IN-XK3190-DS3

Introduction

Weighing indicator IN-XK3190-DS3 is widely applied in electronic floor scale,electronic truck scale ,static railway scale and so on alike static weighing system equipped with 1~16 digital load cell.


Feature:
◆ AC/DC power supply
◆ Interface adopts new magnet-proof technology
◆ With optional interface
(a) Printing data separate module
(b) Digital output module
(c) 4～20mA module

Standard function

◆ Able to connect several sorts of digital load cells using Yaohua protocal
◆ Auto/semi-auto/manual angle correction
◆ Digital load cell communication address modification function
◆ Single load cell and single angle data checking function
◆ With two divisions auto switch function
◆ Non-linearity correction and calibration tolerance correction
◆ Time power-off function
◆ Weighing data save/check/delete/ protection in case of power off
◆ Standard RS232C (RS422/RS485 optional) communication interface
◆ Standard scoreboard interface with 20mA current loop method
◆ Standard parallel print interface
◆ Able to save 1000 vehicle ID and corresponding tare weight,201 cargo ID and corresponding cargo            name,1001 weighing records
◆ Able to back up and recover various parameters of indicator, reliable and practical

Technical parameter

◆ Digital load cell connection
    Connection method: RS485, capatiable for both four and six wires
    Connection distance: About 1000 meters
    Connection quantity:1~16
    Communication protocol of load cell: YAOHUA
    Load cell power: DC 12V,0.8A(Max)
◆ Display
    Display method: 7 bits super bright LED display, 10 indications
◆ Clock: real clock
◆ Scoreboard interface
     Signal: 20mA current loop,serial. Baud rate: 600 Transmission distance: ≤2000 meters
◆ Printer interface
     Available for wide line printer:LQ-300K,KX-P1131,KX-P1121 ,
     DS-300 Thermal micro-printer:POS58,T58D
     Optional panel type micro printer
◆ Serial communication interface
     Standard interface: RS232C (RS422/RS485 optional)
◆ Power supply:AC187～242V;49～51HZ
     DC power supply: (outside) rechargeable 12V battery