Home Companies Wuxi ShiLong Steel Co.,Ltd.

OEM Cold Rolled Stainless Steel Sheet 3/16 304 Stainless Steel Sheet Aisi 304 BA 3mm 5mm And 6mm

Contact Us

[China]

Trade Verify

Address: Xinlian Building, Guangyi Street, Liangxi District, Wuxi City, Jiangsu Province,China

Contact name:Ava

Wuxi ShiLong Steel Co.,Ltd.

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

OEM Cold Rolled Stainless Steel Sheet 3/16 304 Stainless Steel Sheet Aisi 304 BA 3mm 5mm And 6mm

Country/Region	china
City & Province	wuxi jiangsu
Categories	Other Metals & Metal Products

Product Details

Low Carbon 304 Stainless Steel Sheet Coil For Equipment Corrosion Resistance Thickness 2mm

304 stainless steel is a common material in stainless steel, the density of 7.93 g/cm, also known as 18/8 stainless steel.High temperature resistance 800℃, with good processing performance, high toughness, widely used in the industry and furniture decoration industry and food and medical industry.

	C	Si	Ni	Mn	P	S	Cr
Material

	≤0.15	≤1.00	0.8-1.0	5.5-7.5	≤0.060	≤0.030	16.00-18.00
201

	≤0.15	≤1.00	3.5-4.5	7.5-10.00	≤0.060	≤0.030	17.00-19.00
202

	≤0.07	≤1.00	8.00-10.00	≤2.00	≤0.035	≤0.030	17.00-19.00
304

	≤0.030	≤1.00	8.00-10.00	≤2.00	≤0.035	≤0.030	18.00-20.00
304L

	≤0.08	≤1.00	10.00-14.00	≤2.00	≤0.035	≤0.030	16.00-18.50
316

	≤0.030	≤1.00	12.00-15.00	≤2.00	≤0.035	≤0.030	16.00-18.00
316L

	≤0.12	≤0.75	-	≤1.25	≤0.035	≤0.030	16.00-18.00
430

Cold rolled: Hot rolled coil is used as raw material, and the oxide skin is removed by pickling. The product is rolled coil. The cold work hardening caused by continuous cold deformation makes the strength, hardness and toughness and plasticity of rolled coil increase, so the stamping performance will deteriorate and can only be used for parts with simple deformation. Rolled coil can be used as raw material for hot galvanizing plant because annealing lines are set up in hot galvanizing units. The weight of rolled coil is generally 6-13.5 tons. The hot rolled pickling coil is rolled continuously at room temperature. The inner diameter is 610 mm.

Cold Rolled Stainless Steel Sheet / Plate:

a. Stretch good, toughness, but the price is more expensive;
b. Cold rolling processing surface without oxide skin, good quality;
c. Cold rolling is generally used in the production of strip, the rolling speed is high;
d. Cold rolling than the thickness of the high precision. Mechanical properties, surface and so on in the hot rolling;
e. Cold-rolled steel coil due to a certain degree of work hardening, low toughness, but can achieve better yield ratio, used for cold-formed spring and other parts;
f. Cold coil yield point closer to the tensile strength, so the use of risk in the process of no predictability, when the load exceeds the allowable load prone to accidents
g. The surface of the cold rolled steel coil without plating is gray.
h. Cold rolled steel plate surface smoothness is higher than the hot rolled steel coil.

Cold rolled plate
Cold rolled plate					Specification (Thick)	Big Deviation	Normal Deviation	Small Deviation	No Deviation
0.4mm	0.3mm-0.32mm	0.33mm-0.37mm	0.37mm-0.39mm	no less than 0.39mm
0.5mm	0.4mm-0.42mm	0.43mm-0.47mm	0.47mm-0.49mm	no less than 0.49mm
0.6mm	0.5mm-0.52mm	0.53mm-0.56mm	0.57mm-0.59mm	no less than 0.59mm
0.7mm	0.6mm-0.62mm	0.63mm-0.67mm	0.67mm-0.69mm	no less than 0.69mm
0.8mm	0.7mm-0.72mm	0.73mm-0.77mm	0.74mm-0.79mm	no less than 0.79mm
0.9mm	0.8mm-0.82mm	0.83mm-0.87mm	0.87mm-0.89mm	no less than 0.89mm
1.0mm	0.89mm-0.9mm	0.91mm-0.94mm	0.94mm-0.99mm	no less than 0.99mm
1.2mm	1.02mm-1.08mm	1.09mm-1.15mm	1.16mm-1.18mm	no less than 1.18mm
1.5mm	1.32mm-1.38mm	1.39mm-1.45mm	1.46mm-1.48mm	no less than 1.48mm
2.0mm	1.72mm-1.79mm	1.8mm-1.86mm	1.87mm-1.9mm	no less than 1.9mm
2.5mm	2.23mm-2.36mm	2.32mm-2.42mm	2.42mm-2.47mm	no less than 2.48mm
3.0mm	2.7mm-2.77mm	2.78mm-2.85mm	2.85mm-2.9mm	no less than 2.9mm

Factory and Machinery Equipment :

We had our own factory to do slitting re-rolling and finish treatment machine,PVC and interleaving paper we will using with our machine for you,could protect stainless steel surface from damage or any scratches,

1. CNC Flame Cutting Machine

2. CNC Plasma Cutting Machine

3. CNC Laser Cutting Machine

4. Bending Machine

5. Shearing Machine

6. Punch Machine

7. Driving Machine

Different kinds of finish sevices