Home Companies Wuxi ShiLong Steel Co.,Ltd.

253Ma Stainless Steel Metal Strips 316 1.2mm Duplex 2205 2507 254SMO

Contact Us

[China]

Trade Verify

Address: Xinlian Building, Guangyi Street, Liangxi District, Wuxi City, Jiangsu Province,China

Contact name:Ava

Wuxi ShiLong Steel Co.,Ltd.

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

253Ma Stainless Steel Metal Strips 316 1.2mm Duplex 2205 2507 254SMO

Country/Region	china
City & Province	wuxi jiangsu
Categories	Barbed Wire

Product Details

Duplex 2205 2507 254SMO 253Ma Stainless Steel Strip

Product Description

Duplex stainless steel has the austenite + ferrite dual phase structure, and the content of the two phase structures is basically the same, so it has the characteristics of austenitic stainless steel and ferritic stainless steel. The yield strength can reach 400Mpa ~ 550MPa, which is twice that of ordinary austenitic stainless steel. Compared with ferritic stainless steels, duplex stainless steels have high toughness, low brittle transition temperature, and significantly improved intergranular corrosion resistance and welding performance; while retaining some of the characteristics of ferritic stainless steels, such as 475℃ brittleness, heat High conductivity, small linear expansion coefficient, superplasticity and magnetic properties. Compared with austenitic stainless steels, duplex stainless steels have high strength, especially yield strength is significantly improved, and pitting corrosion resistance, stress corrosion resistance, corrosion fatigue resistance and other properties have also been significantly improved.

Product	Duplex 2205 2507 254SMO 253Ma Stainless Steel Strip
Material Type	Ferrite stainless steel, magnetic; Austenitic stainless steel, Non-magnetic.
Grade	304,304L,309S,310S,316,316Ti,317,317L,321,347,347H,304N,316L,316N,201,202
Technology	Cold Rolled
Thickness	0.17mm - 2.0mm
Width	10mm - 250mm
Surface	2B, 2D, BA, NO.4, HL, SB
Edge	Slit / Trim Edge
Other Service	Leveling: improve flatness, esp. for items with high flatness request.
Other Service	Skin-Pass: improve flatness, higher brightness
Protection	1. Inter paper available
Protection	2. PVC protecting film available
The sizes or thicknesses of stainless steel coil can be customized, if you need additional information, please don’t hesitate to contact us at any time.
All standard products are supplied without inter paper & film. If needed, please inform.

Surface Treatment and characteristic

Surface finish	Characteristics and application
NO.2B	1.The surface brightness and flatness of no2B is better than no2D. 2.Then through a special surface to improve mechanical properties
NO.1	The surface is finished by heat treatment and pickling or processes corresponding after hot rolling.
NO.4	Polished with abrasive belt of grit #150-#180,have better brightness with discontinuous coarse stria.
BA	Cold rolled, bright annealed and skin-passed, the product have excellent brightness and good reflexivity kitchen apparatus.
8K	The product have excellent brightness and prefer reflexivity can to be the mirror.