Astm Spring Steel Uniformly Heated 28-34 HRc
SAE-AISI 5160 steel is an alloy steel formulated for primary
forming into wrought products. 5160 is the designation in both the
SAE and AISI systems for this material. G51600 is the UNS number.
It can have a moderately low ductility among the SAE-AISI wrought
steels in the database.
The properties of SAE-AISI 5160 steel include four common
variations. This page shows summary ranges across all of them. For
more specific values, follow the links immediately below. The graph
bars on the material properties cards further below compare
SAE-AISI 5160 steel to: SAE-AISI wrought steels (top), all iron
alloys (middle), and the entire database (bottom). A full bar means
this is the highest value in the relevant set. A half-full bar
means it's 50% of the highest, and so on.
Carbon steel is available as bright drawn key steel in flat and
square sections. With medium tensile strength key steel is used
widely in general engineering for components such as plain,
gibhead, taper and parallel keys. Key steel is produced to the
required tolerances as specified in British Standard BS46 and
BS4235.Carbon spring steel specifications EN42, CS70, CS80, CS95
and CS100 are available as hardened and tempered spring steel
strip, annealed spring steel strip, spring steel plate and spring
steel sheet. EN43 spring steel is available in bar and plate. The
grades commonly conform to BS970, BS1449, BS EN10083-1, BS
EN10083-2, BS EN 10277 and BS EN 10278 standards.X120Mn12 1.3401 is
a manganese steel with 1% carbon steel and an 11% to 14% manganese
content supplied in plate. Offering excellent work hardening
properties high manganese steel can be supplied in full plates or
cut to your requirements.
With an objective to fulfill ever evolving demands of customers, we
have been able to manufacture and supply premium quality SAE 5160 Spring Steel to our prestigious clients. It is widely used in metallurgical,
mechanical, electrical construction field, ships, military uses and
automobile rear of products. Apart from this, it is well known for
its High yield to tensile strength ratio, great toughness and high
tensile strength.
SAE 5160 Spring Steel is fabricated through superior quality components that are in
compliance with international standards. Also, it is well tested on
parameters of quality and durability to ensure flawless products to
our customers.
Technical Specification
Grade | C | Mn | P | S | Si | Cr |
5160/ 5160H | 0.55-0.65 | 0.65-1.00 | 0.035max | 0.035max | 0.15-0.35 | 0.60-1.00 |
AISI 5160 Steel is a high quality Cold work Spring Steel, It belong
to the high quality high carbon alloy Spring Steel. Oil Quenched
& Tempered Hardness is 28-34 HRc. 5160 steel Annealing delivery
hardenss less than 250HB.
