|
[China]
Trade Verify
Address: Building 3, Entrepreneurship Center, High-tech Zone, Hengyang City, Hunan Province.
Contact name:Richard Lee
HENGYANG ZK INDUSTRIAL CO., LTD |
|
Verified Suppliers
|
|
|
Product name:
Low Power shrink material Insulating Tube For Cold Shrink Splice Cover Kit
Description:
Hengyang ZK industrial has been engaged with cold shrink splice for many years,which has safer business
way and good quality of products,we will be your frist choice for cold shrink material supplier.
1, widely used in low-voltage cable terminal processing;
2, to maintain a constant tightening force, with the cable with the breath, to ensure excellent interface characteristics.
3, advanced production technology, vacuum high pressure injection vulcanization molding. Internal structure perfect, no defects, in the 21KV below the Council put less than 1pc (8.7 / 15KV series).
4, without fire and special tools, and no gradually into the
trouble, just gently extract the core rope,
5, the use of imported liquid silicone rubber to ensure excellent
insulation and high flexibility, the installation of the cable body
has always been to maintain a constant radial pressure, local
discharge is small, with the cable body with the "breathing."
6, the terminal body with the cold shrink branch finger sets, cold
shrink insulation tube and cold shrink terminal seal tube;
intermediate connector with three waterproof sealing process to
ensure that the annex excellent sealing moisture resistance.
7, the installation is simple, the operation of the technical
dependence is low, easy to master.
8, anti-pollution, anti-aging, good hydrophobicity, with excellent
corrosion resistance, cold resistance and anti-ultraviolet, to
ensure long-term use of stable performance. Especially for high
altitude areas, cold areas, wet areas, salt fog areas and heavily
polluted areas
Introduction:
| Material technical parameters: | |||||
| No | Items | Test method | Unit | Test standard | Remarks |
| 1 | Hardness (Shore A) | GB/T 531.1-2009 | Shore A | 43±5 | |
| 2 | Tensile strength | GB/T 528-2009 | Mpa | 8±3 | |
| 3 | Break elongation | GB/T 528-2009 | % | 800±200 | |
| 4 | Tear strength | GB/T 529-2008 | kN/mm | 38±5 | |
| 5 | Volume resistivity | GB/T 2439-2001 | Ω•cm | ≥1013 | |
| 6 | dielectric strength | GB/T 1695-2005 | MV/m | ≥18 | |
| 7 | dielectric Constant(50Hz) | GB/T 1693-2007 | / | ≤8 | |
Here you can find cold shrink splice made of different materials for base stations, silicone, EPDM and Silicone with Bilateral Built-in Mastic. They can be used to connect cable to cable or connect cable to device for waterproofing. 1/4" , 3/8" , 1/2" s, 1/2", 7/8”, LMR195 coaxial cable to 4.3-10, 4.1-9.5, 7/16DIN,
Contact Information:
Person:Michelle
Tel:+86 18821818422
