|
[China]
Trade Verify
Address: Building 3, Entrepreneurship Center, High-tech Zone, Hengyang City, Hunan Province.
Contact name:Richard Lee
HENGYANG ZK INDUSTRIAL CO., LTD |
|
Verified Suppliers
|
|
|
Product name:
EPDM cold shrink tube for telecom protection sleeve
Description:
EPDM Cold Shrink Tubes are a series of open-ended, tubular rubber sleeves, which are factory expanded and assembled onto a removable core. They are supplied for field installation in this pre stretched condition. The core is removed after the tube has been positioned for installation over an in-line connection terminal link allowing the tube to shrink and form a waterproof seal. The insulating tube is made of EPDM rubber which contains no chlorides or sulphurs.
Product Features:
1:Simple installation,no special tools required |
| 2:No torches or heat required |
| 3:Good thermal stability |
| 4:Seals tight retain its resiliency and pressure even afte prolonged years of ageing and exposure |
| 5:Excellent wet elctrical properties |
| 6:Improved tough rubber formulation to withstand rough backfilling |
| 7:Waterproof |
| 8:Resists fungus |
| 9:resists acidss and alkalis |
| 10:Accommodates a wide range of cable sizes |
Introduction:
EPDM cold shrink tube: applied in electrical power industry, telecommunication industry or other tool product handle, eg. bicycle handle etc. With it’s good performance: water-proof, Acid and alkali resistance, seal, protection sleeve and low voltage seal insulation under 1kv.
| Material technical parameters: | |||||
| No | Items | Test method | Unit | Test standard | Remarks |
| 1 | Hardness (Shore A) | GB/T 531.1-2009 | Shore A | 43±5 | |
| 2 | Tensile strength | GB/T 528-2009 | Mpa | 8±3 | |
| 3 | Break elongation | GB/T 528-2009 | % | 800±200 | |
| 4 | Tear strength | GB/T 529-2008 | kN/mm | 38±5 | |
| 5 | Volume resistivity | GB/T 2439-2001 | Ω•cm | ≥1013 | |
| 6 | dielectric strength | GB/T 1695-2005 | MV/m | ≥18 | |
| 7 | dielectric Constant(50Hz) | GB/T 1693-2007 | / | ≤8 | |
