Guangzhou Chuangyuan Electronical Technology Co., Ltd. |
|
Glass Fiber Amusement Bumper Cars / Metal Frame Kids Bumper Cars 80kg
Amusement Bumper Cars Features
Amusement Bumper Cars Parameter configuration
Machine weight: 130kg / package 140kg
Maximum load: 80kg
Driving speed: 19/14/6km/h software stepless speed regulation
Brake configuration: mechanical disc brake
Start mode: manual machine, one remote control, one-on-one start
I0 control panel: intelligent sound and light, remote management
Supporting drive: 48V500W intelligent speed control
Matching motor: 48V500W
Supporting battery: 48V20A graphite thin + high silver
Battery life: 150-360 minutes
Supporting charger: 2.8A/1P
Sound effect configuration: 12V180W power amplifier +8 Euro 15W*2
Advertising, audit display: L300*W85mm LED four-character display
Security configuration: smart seat belt
Matching lights: LED soft light + LED colorful
How to play Amusement Park Bumper Cars
1. Switching machine button: After the car is powered on, press and
hold the power button for 3 seconds, the car runs, and all lights
are detected and then enter the idle state; after the car is
running, the power button is connected for 3 seconds, and the car
is turned off.
2. Start button: After the car runs and enters the idle state,
press the remote control A. After the completion of the prompt
tone, press the start button to enter the game state; during the
game, the start button can be used as the speaker button.
3, seat belt: in order to ensure safety, in the game state, you
must buckle the seat belt before you can play
4, throttle: throttle in the right front of the seat, during the
play, step on the gas pedal, the car will accelerate forward
5, brake: the brake is in front of the left front of the seat,
during the play, step on the brakes, the car slows down, the brake
light behind the car is bright
6. Drifting lever: The drifting lever is on the right side of the
seat. During the play, step on the throttle, hit the steering
wheel, press the pull lever, and the car drifts.
7, reversing button: press the reversing button to step 2 times the
throttle, the car back