Precision Grinding Wire Guide Tube With Carbide Steel / Hard Alloy Materials

High Hardness Alloy Wire Nozzle,

Coil Winding Wire Guide Nozzle
Tungsten Carbide Nozzle/High Hardness Alloy Wire Nozzle
Wire Guider Nozzle with Mirror Surface Treatment Hard Alloy Nozzle
Product Category: Nozzle series

Product Features:

This product is made of super hard alloy material precision machining, its hardness up

to HRA90 above, this product at both ends and the inner hole all for mirror processing,

in order to protect the enamel covered wire is not scratched. With high rigidity and hardness,

not easy to bend and plug, impact resistance.

Can be produced in accordance with customer requirements!

Eliminate wire insulation film damage, low friction resistance, stable wire tension.

The wire-guiding surfaces are mirror finished by diamond lapping to a surface

roughness of 2 -4 micro inches Ra or better, material permit.

Superior and inferior quality of alloy wire nozzle:

1 Nozzle orifice finish:
At the junction of its location, hole and arc angle, by visual method is unable to see, only with

the high magnification magnifier to observe the side, if there is an obvious mark junction hole

and transition arc angle, then the result is brought about by it scratch the enameled wire, if the

quality of the nozzle, at the junction of the inner hole and the arc angle it is a natural excessive,

no transfer of marks.

2 In the hole:
It is the quality of the product is also very crucial in the process of product winding in the inner

hole of the enameled wire is in the mouth of the online beating state, if the internal hole

grinding processing is not good, so the scraped line and then the inevitable worth to remind is,

now on the market a lot in hole alloy wire mouth is without grinding precision or simple rough

machining.
3 Hole size precision:
Precision machining line mouth, its inner hole accuracy can be controlled within 0.01mm, if the hole

size is greatly small, break phenomenon often occurs, even the winding insulation failure or interturn

short circuit is not hard to explain why.

4 Installation size precision

According to the consistency of the packing size is necessary, if it is hard to put into a small equipment fixture, it is easy to fall out of fixture and influence adjustment precision.

5 head and tail shape:
R line shape is a key part of the R mouth of the head and tail, R is too large or too small will influence

the quality of products and can withstand the tension.

Nozzle Drawings for example :

Picture show :

Why do you choose us?
1.100% manufacturer
In hardware tools, the wire winding machine training industry has more than 10 years of experience,

we have more than and 100 skilled workers.

2. competitive price
One-stop service, from the material of die cutting process, production, QC, packaging, delivery.

We are sure we produce all the goods. And the quality is 100% rest assured. Many customers are

very happy to cooperate with us, because we can provide a more competitive price as a factory.

3. The best choice of material
All of our goods are the best material from the best suppliers, whether the material is qualified can

be checked.

4. Quality Control
Before shipment, there are specialized personnel checks, each product in the packaging before

the inspection is qualified. We guarantee that each product shipment is perfect for sale.

5. Good service
We promise to answer your question in 24 hours.