380V 50HZ Shrink Packing Machine , Cold Shrink Film Packaging Machine

Product Description:

Features:

1. Cold stretch film machine stretching and bagging is an operation cycle.
2, stable and strong modular structure design, suitable for continuous operation.
3. The film is easy to replace.
4, according to the size of the pallet, automatically select the most appropriate film.
5. After the film is stretched to cover the entire pallet, the gripper begins to fall.
6. Finally, the film will slide into the bottom of the pallet to tightly bond the pallet with the deposit.
7. The gripper rises to the starting point and the ultrasonic device begins to detect the height of the next stack of deposits.
8. When the jacket completes the pallet and leaves the host, the next pallet immediately enters the host.

Technical Parameters:

◆ Model specifications: QT-1200 automatic bagging machine;
◆ Use product size: length 800~980×width 600~800×height 600~1100mm
◆ Cylinder film: reel diameter 600mm
◆ Bagging speed: 20-60 pieces per hour
◆ Sealing width: 5mm
◆ Use air source: 6pm2
◆ Vacuum suction: 30kg
◆ Power source: 380V 50HZ 6KW
● Size specifications:

Film technical requirements:
1. The surface of the film should be clean and free of grease.
2. film specifications, thickness: 0.08 ~ 0.13mm, dimensional tolerance is ± 0.01mm,
3. The film tensile strength is 1:1.4.
4. The inner diameter of the core of the film cylinder is 76.2mm.
5. The film roll has a maximum diameter of Ф600 mm and is rolled into a width of 1200 mm.
6. Before using this equipment, the manufacturer must provide the required film size and sample test.

Performance Description:

Cold stretch film technology has replaced the traditional PE stretch film. The green iron has gradually introduced the cold stretch film packaging technology for beverage, food, chemical and textile enterprises with large demand for packaging!
The LLDPE cold stretch film packaging machine can process 60 pallets per hour. The cold stretch film from top to bottom completely covers the product and the pallet. The cold stretch film is suitable for safe transportation and storage of your products. . Cold drawing shrinkage ratio: 17-20%, cold stretch film thickness: 0.1mm, the amount of each pallet: about 500-560g, characteristics: dustproof, rainproof, heat dissipation, not easy to tilt, the loan does not move and wear each other , thereby reducing the cost of packaging materials.

◆ Fully automatic operation. Maximum capacity of 60 pallets per hour (slightly different depending on the height of the stack of stacks).
◆The bag is sealed at the top of the film to make it waterproof.
◆ Suitable for transportation. The stacked items are tightly held together by the shrink film, which can effectively prevent falling off.
◆ The shrink film must be cut to remove the accumulated items, which can reduce the risk of theft.
◆ Cold stretch film does not require heat. Save energy and completely eliminate the risk of fire or explosion.
◆ Both the protective properties of the heat shrinkable film and the economic characteristics of the film wrapping machine.
◆ Different designs can be made according to actual needs.
◆Double-head design, which can automatically select the most suitable film according to the size of the pallet.

Operation process:

1. The ultrasonic device detects its height and determines the length of the desired film.
2. The gripper is stretched forward until the film has been pulled down, and the film is started to be pulled, and the film is pulled by suction.
3. When it is determined that the required film length is completely retracted on the gripper, the film will be sealed and cut.