Arista QSFP-100G-SR4 QSFP28 850nm 100m DOM MPO MMF Optical Transceiver Module

Product Description:

Color Optic's QSFP28 SR4 is a parallel 100 Gbps Quad Small Form-factor Pluggable (QSFP28) optical module. It provides increased port density and total system cost savings. The QSFP28 full-duplex optical module offers 4 independent transmit and receive channels, each capable of 25 Gbps operation for an aggregate data rate of 100 Gbps on 100 meters of OM4 multi-mode fiber. An optical fiber ribbon cable with an MTP/MPO connector can be plugged into the QSFP28 module receptacle. Proper alignment is ensured by the guide pins inside the receptacle. The cable usually cannot be twisted for proper channel to channel alignment. The module operates by a single +3.3V power supply. The CO-S81H85SC is designed with form factor, optical/electrical connection and digital diagnostic interface according to the QSFP28 Multi-Source Agreement (MSA). It has been designed to meet the harshest external operating conditions including temperature, humidity and EMI interference. The module offers very high functionality and feature integration, accessible via a two-wire serial interface.

Color Optic's CO-S81H85SC is a Arista® compatible 100GBase QSFP28 Optical Transceiver and is factory pre-programmed with all the necessary configuration data for seamless network integration. Our transceivers perform identically to Arista® original transceivers and are 100% compatible with other OEM and third party transceivers. The CO-S81H85SC is 100% MSA (Multi-Source Agreement) compliant. All Color Optic's transceivers are tested for 100% functionality and guaranteed compatible for outstanding network performance

Features:

• 4 independent full-duplex channels

• • Up to 28Gbps data rate per channel
• • QSFP28 MSA compliant
• • Up to 100m over OM4 MMF transmission
• • Up to 70m over OM3 MMF transmission
• • Single 3.3V power supply
• • Maximum power consumption 3.5W
• • MTP/MPO optical connector
• • RoHS-6 compliant
• • Operating Case Temperature
• • Standard 0 to +70 °C
• • Extended -4 to +85 °C

Technical Parameters:

Form Factor: QSFP28

TX Wavelength: 850nm

Reach: 100m

Cable Type: MMF

Rate Category: 100GBase

Interface Type: SR4

DDM: Yes

Connector Type: MPO

Optical Power Budget: 2.3 dB

TX Power Min/Max: -8.0 to +2.4 dBm

RX Power Min/Max: -10.3 to +2.4 dBm

Applications:

• • ​Data Center, Rack to rack
• • Infiniband QDR, DDR and SDR
• • 100G Ethernet

Packing and Shipping:

The SFP Optical Module is packaged with the following items:
- SFP Optical Module
- User manual
- Warranty card
- Plastic cover

The SFP Optical Module is shipped in a cardboard box with protective cushioning material. The box is sealed with strong tape to ensure that the product is well protected during transit.