RAL3009/ RAL3005 Wrinkle Textured Matt Pre-Painted Galvanized Steel
Coil Z100g Roof Panel Tile 20 Years Quality Warranty
Matt Textured Colour Coated Steel Sheet
Matt Textured colour coated steel plate is a hot-dip galvanized alloy steel plate as a substrate, after
the surface of continuous roller coating production method, the use
of adding special additives to the coil topcoat, after baking to
produce like a fishing net-like pattern effect, can be
professionally customized according to the customer's requirements
of a variety of different sizes, different depths and shades of
different colours of the texture pattern.
Product characteristics
The coating presents "diffuse reflection characteristics" to the
sunlight, and when applied to industrial plants, due to the diffuse
reflection characteristics of the surface of the coating, it makes
the overall building colour softer and avoids light pollution.
Applied to villas, high-grade integrated house roofs and high-rise
buildings, it can enhance the contrast with the surrounding
environment and reduce the visual deviation of pilots who fly over
the buildings.
The surface has a good "mesh" visual effect.
Because of the production of warm or dark coloured paints, it has a
certain heat-absorbing effect and a psychological underlining
effect when used in cold northern regions.
Scope of application
Because of its low light effect, close to nature and other
characteristics, mesh colour coated board is widely used in
high-rise buildings, villas, high-end integrated housing,
industrial buildings and other indoor and outdoor decoration.
Especially in civil buildings, villas and other roof colour steel
antique tiles in the production of the most widely used.
Coating Structures
Type of coating structure
2/1: Coat upper surface twice, lower surface once, bake twice.
2/1M: Coat upper and lower surfaces twice, bake once.
2/2: Top and bottom surfaces are coated twice each and baked twice.
Usage of different coating structures:
2/1: The corrosion resistance and scratch resistance of single
layer back coating is poor, but it has good adhesion, mainly used
for sandwich panels.It is mainly used for sandwich panels;
2/1M: backcoat with good corrosion resistance, scratch resistance
and moulding properties, good adhesion, suitable for single-layer
compression moulding panels.
2/1M: good corrosion resistance, scratch resistance and moulding
properties, good adhesion, suitable for single-layer pressboards
and sandwich panels.
2/2: double-layer backing paint with good corrosion resistance,
scratch resistance and processability, mostly used for single-layer
pressboards, but with good adhesion.
Most of them are used for single-layer moulding board, but its
adhesion is not good, and it is not suitable for sandwich board.
Colour Coated Coil Coating Type
Polyester
Good adhesion, rich colours, wide range in formability and outdoor
durability, medium chemical resistance, low cost.
Silicon Modified Polyester
Silicone Modified Polyester (SMP), good film hardness, abrasion and
heat resistance, as well as good exterior durability and resistance
to chalking, gloss retention, general flexibility, medium cost.
High Durability Polyester
(HDP), excellent colour retention and UV resistance, excellent
exterior durability and chalking resistance, good film adhesion,
rich colour, excellent cost performance.
Polyvinylidene fluoride
(PVDF), excellent colour retention and UV resistance, excellent
outdoor durability and chalking resistance, excellent solvent
resistance, good formability, dirt resistance, limited colours,
high cost.
Index | Pre-Painted Galvanized/ Galvalume / Aluminum Sheets & Coils |
Thickness | Base Metal : GI: 0.20-1.70mm; GL: 0.20-1.50mm |
Base Metal: Aluminum 0.30-3.0mm |
Width | 600~1500mm |
Zinc Coating | Z40~Z275 g/㎡AZ30~AZ200 g/㎡ |
Paint Structure | 2/1, 2/2, 3/2, 3/3 |
Paint Coating | Top side: 15μm~55μmBack side: 5μm~30μm |
Paint System | RMP, PE, SMP, HDP, PVDF |
Paint Brand | PPGBeckersAkzoNobelValspar (Sherwin-Williams)Chinese local brands |
Paint surface | Gloss RAL color systemTextured/Matt/Wrinkle SurfacePrintch Pattern Colors-Wood, Brick, Stone grains. |
Coil weight | 2 ~ 10 tons |
Packing | Standard export packing ( Eye to Side)Vertical Packing ( Eye to Sky) with wooden palletHorizontal Packing ( Eye to Side) with wooden pallet |
MOQ. | 16 tons/color/size |
Pre-Painted Steel / Aluminum Coating Structure
DECHO building colour steel plate can meet the need to use colour
steel plate as raw material for building. Decho Building Materials
colour steel plate is mainly processed into, for example, colour
steel corrugated board or colour steel composite sandwich board
after our colour steel plate is widely used in the construction of
airports, freezers, steel plants, warehouses, and other industrial
buildings and commercial buildings, such as the roof of the colour
steel tiles, colour steel plate sandwich walls and doors.
Reasons for choosing Decho Building Materials new material:
Provide extremely rich colour choices
The paint surface is long-lasting and bright
Surface coating will not fall off after stamping and has good
hardness with strong ductility and is not easy to scratch.
with excellent weather resistance, corrosion resistance, is to
ensure the durability of the premise of the building
DECHO BUILDING MATERIALS for the manufacturer direct sales
The colour is customized by customers;
Thickness and width have a variety of options;
We provide whole rolls and cut boards for sale;
Welcome to enquire.
