|
[China]
Trade Verify
Address: Building 8, No. 12, Zhicheng Road, Songshan Lake Park, Songshan Lake Management Committee, Dongguan City, China
Contact name:Michelle Liu
Dongguan Lizhun machinery Co., LTD |
|
Verified Suppliers
|
|
|
The VMC-1580 is a high speed, high precision and high rigidity vertical machining center. The size of the worktable is 800*1700. The major structural parts are manufactured from high quality cast iron, and the fuselage and base have ultra-high hardness and rigidity, providing extremely high stability for the processing process.The base of this machine adopts the design of oil and water separation, which can not only prolong the service life of the chip fluid, but also reduce the cost and meet the requirements of environmental protection requirement. This machine is also equiped with a high speed and rigidity spindle nose which can absorb vibration, this spindle nose can effectively avoid the precision problem caused by vibration, such as the surface precision of workpiece is affected by tool vibration.
| ITEM | MODELS | VMC1580 |
| WORKTABLE (WIDTH*LENGTH) | mm | 800*1700 |
| DISTANCE BETWEEN T SLOTS | mm | 5-22*135 |
| MAX LOAD BEARING OF WORKTABLE | kg | 1500 |
| X/Y/Z AXIS TRAVEL | mm | 1500/800/700 |
| DISTANCE FROM SPINDLE NOSE TOWORKBENCH | mm | 170-780 |
| SPINDLE HOLE TAPER | TB50 | |
| SPINDLE SPEED RANGE | r/min | 8000 |
| TRANSMISSION OF SPINDLE BOX | BELT/DIRECT | BELT/DIRECT |
| SPINDLE MOTOR POWER | kW | 15 |
| X/Y/Z RAPID FEED SPEED | m/min | 18*18*18 |
| MAX CUTTING FEED SPEED | mm/min | 1-10000 |
| TOOLS MAGAZINE CAPACITY | pcs | 24 |
| FULL TOOLS MAX TOOL DIAMETER | mm | 240 |
| MAX.TOOLS ALLOWABLE WEIGHT | kg | 15 |
| MAX.TOOLS ALLOWABLE LENGTH | mm | 305 |
| X/Y/Z POSITION ACCURACY | mm | 0.008 |
| X/Y/Z RE-POSITION ACCURACY | mm | 0.005 |
| MACHINE DIMENSION | mm | 4110*2740*2900 |
| MACHINE WEIGHT | kg | 12800 |
1. Full Cover shield /
2. Self-lubrication system /
3. Working lights /
4. Warning lights /
5. Working condition warning lights /
6. Self-powered electrical shutoff system /
7. Clean air gun/ Water Tank / Transformer /
8. Spindle air curtain and dust control system /
9. 10000 RPM spindle /
10.Worktable cleaning water gun
1. 24 disc manipulator tool magazine /
2. Crawler chips remover /
3. NC rotary table (4 Axis) /
4. CTS /
5. Tool detection system /
6. AJO /
7. 12000 & 15000 RPM Direct connection spindle /
8. Oil mist purifier
