|
[China]
Trade Verify
Address: Building 8, No. 12, Zhicheng Road, Songshan Lake Park, Songshan Lake Management Committee, Dongguan City, China
Contact name:Michelle Liu
Dongguan Lizhun machinery Co., LTD |
|
Verified Suppliers
|
|
|
The worktable size of the 5 Axis CNC Vertucal Machining Center VMC 1380 is 800 *1400. For processing some large complex workpiece, the wide worktable size will be better, and the maximum bearing weight of the workbench is also up to 900kg. Both three axis are using High precision roller type guideway, which with the characteristics of heavy cutting rigidity of hard guideway and fast movement and low wear of linear guideway, the rigidity and control are greatly improved. The Integrated bearing block is also using on this machine, which can effectively improve the overall rigidity of the axial system and effectively avoid the rotation deformation of the screw. At the same time, the oil and water separation of the base design can be greatly prolong the service life of the chip fluid and reducing the cost and meet the requirements of environmental protection requirement.
| ITEM | MODELS | VMC1380 |
| WORKTABLE (WIDTH*LENGTH) | mm | 800*1400 |
| DISTANCE BETWEEN T SLOTS | mm | 5-18*152.5 |
| MAX LOAD BEARING OF WORKTABLE | kg | 900 |
| X/Y/Z AXIS TRAVEL | mm | 1300/800/650 |
| 5-AXIS | / | |
| DISTANCE FROM SPINDLE NOSE TOWORKBENCH | mm | 150-800 |
| SPINDLE HOLE TAPER | TB50 | |
| SPINDLE SPEED RANGE | r/min | 8000 |
| TRANSMISSION OF SPINDLE BOX | BELT/DIRECT | BELT/DIRECT |
| SPINDLE MOTOR POWER | kW | 15 |
| X/Y/Z RAPID FEED SPEED | m/min | 24*24*18 |
| MAX CUTTING FEED SPEED | mm/min | 1-10000 |
| TOOLS MAGAZINE CAPACITY | pcs | 24 |
| FULL TOOLS MAX TOOL DIAMETER | mm | 240 |
| MAX.TOOLS ALLOWABLE WEIGHT | kg | 15 |
| MAX.TOOLS ALLOWABLE LENGTH | mm | 305 |
| X/Y/Z POSITION ACCURACY | mm | 0.008 |
| X/Y/Z RE-POSITION ACCURACY | mm | 0.005 |
MACHINE DIMENSION | mm | 3630*2600*2640 |
MACHINE WEIGHT | kg | 10000 |
1. Full Cover shield /
2. Self-lubrication system /
3. Working lights /
4. Warning lights /
5. Working condition warning lights /
6. Self-powered electrical shutoff system /
7. Clean air gun/ Water Tank / Transformer /
8. Spindle air curtain and dust control system /
9. 10000 RPM spindle /
10.Worktable cleaning water gun
1. 24 disc manipulator tool magazine /
2. Crawler chips remover /
3. NC rotary table (4 Axis) /
4. CTS /
5. Tool detection system /
6,. AJO /
7. 12000 & 15000 RPM Direct connection spindle /
8. Oil mist purifier
