Dongguan Lizhun machinery Co., LTD |
Verified Suppliers
|
|
The 4 Axis VMC-1160 is one of the VMC series products taht independently developed and produced by our company. Like the other VMC series products, the 4 Axis VMC-1160 has a high-strength base and body which can bring extremely high stability for machining. This machine is equiped with a high speed, high precision and high rigidity 10000 RPM spindle, and the spindle has also passed the dynamic balance correction test before leaving the factory to ensure the accuracy. The machine is equipped with integrated bearing block. It can effectively improve the overall rigidity of the axial system and effectively avoid the rotation deformation of the screw. The base of this machine adopts the design of oil and water separation, which can not only prolong the service life of the chip fluid, but also reduce the cost and meet the requirements of environmental protection requirement. This machine is also equiped with a high speed and rigidity spindle nose which can absorb vibration, this spindle nose can effectively avoid the precision problem caused by vibration, such as the surface precision of workpiece is affected by tool vibration.
ITEM | MODELS | VMC1160 |
WORKTABLE (WIDTH*LENGTH) | mm | 600*1200 |
DISTANCE BETWEEN T SLOTS | mm | 5-18*120 |
MAX LOAD BEARING OF WORKTABLE | kg | 1000 |
X/Y/Z AXIS TRAVEL | mm | 1100/600/600 |
4-AXIS | / | |
DISTANCE FROM SPINDLE NOSE TOWORKBENCH | mm | 1100/600/600 |
SPINDLE HOLE TAPER | ||
SPINDLE SPEED RANGE | r/min | 10000 |
TRANSMISSION OF SPINDLE BOX | BELT/DIRECT | BELT/DIRECT |
SPINDLE MOTOR POWER | kW | 11 |
X/Y/Z RAPID FEED SPEED | m/min | 24*24*18 |
MAX CUTTING FEED SPEED | mm/min | 10000 |
TOOLS MAGAZINE CAPACITY | pcs | 24 |
FULL TOOLS MAX TOOL DIAMETER | mm | 100 |
MAX.TOOLS ALLOWABLE WEIGHT | kg | 7 |
MAX.TOOLS ALLOWABLE LENGTH | mm | 305 |
X/Y/Z POSITION ACCURACY | mm | 0.008 |
X/Y/Z RE-POSITION ACCURACY | mm | 0.005 |
MACHINE DIMENSION | mm | |
3070*2370*2480 | ||
MACHINE WEIGHT | kg | 7800 |
1. Full Cover shield /
2. Self-lubrication system /
3. Working lights /
4. Warning lights /
5. Working condition warning lights /
6. Self-powered electrical shutoff system /
7. Clean air gun/ Water Tank / Transformer /
8. Spindle air curtain and dust control system /
9. 10000 RPM spindle /
10.Worktable cleaning water gun
1. 24 disc manipulator tool magazine /
2. Crawler chips remover /
3. NC rotary table (4 Axis) /
4. CTS /
5. Tool detection system /
6,. AJO /
7. 12000 & 15000 RPM Direct connection spindle /
8. Oil mist purifier