|
[China]
Trade Verify
Address: Building 8, No. 12, Zhicheng Road, Songshan Lake Park, Songshan Lake Management Committee, Dongguan City, China
Contact name:Michelle Liu
Dongguan Lizhun machinery Co., LTD |
|
Verified Suppliers
|
|
|
1.The fuselage and saddle are reinforced by mountain shaped ribs,
with the shortest force streamline, ensuring the best rigidity of
the fuselage.
Based on the excellent engineering design, the stiffeners of the
base and column of the machining center can resist the torsion and
damping, and transfer the cutting vibration to non
Cutting area. The column is designed with torque tube, which can
provide excellent rigidity, bending and torsion resistance Ultra
wide base design,
At the same time, lower the center of gravity of the base and
adjust the center of gravity of the machine tool to the best stable
height. The span at the bottom of the column is widened to improve
the stability of the machine tool.
2.Taiwan precision screw rod and Taiwan precision lock nut are adopted. The lead screw bearing adopts Japanese NSK bearing, which is directly connected with flexible coupling, with small back clearance, sensitive transmission and high precision.
3.According to the finite element analysis of the main structure,
the machine base, spindle box, cross slide table, worktable, etc.
are made of high-quality HT250 precision casting, which can ensure
the stability of long-term processing after secondary failure
treatment.
| ITEM | MODELS | VMC850 |
| WORKTABLE (WIDTH*LENGTH) | mm | 1000x500 |
| DISTANCE BETWEEN T SLOTS | mm | 5-18x100 |
| MAX LOAD BEARING OF WORKTABLE | kg | 600 |
| X/Y/Z AXIS TRAVEL | mm | 800/500/500 |
| 4-AXIS | / | 200 |
DISTANCE FROM SPINDLE NOSE TOWORKBENCH | mm | 110-810/110-610 |
| SPINDLE HOLE TAPER | BT40 | |
| SPINDLE SPEED RANGE | r/min | 10000 |
| TRANSMISSION OF SPINDLE BOX | BELT/DIRECT | BELT/DIRECT |
| SPINDLE MOTOR POWER | kW | 7.5 |
| X/Y/Z RAPID FEED SPEED | m/min | 48/48/48 |
| MAX CUTTING FEED SPEED | mm/min | 12000 |
| TOOLS MAGAZINE CAPACITY | pcs | 24 |
| FULL TOOLS MAX TOOL DIAMETER | mm | 100 |
| MAX.TOOLS ALLOWABLE WEIGHT | kg | 7 |
| MAX.TOOLS ALLOWABLE LENGTH | mm | 260 |
| X/Y/Z POSITION ACCURACY | mm | 0.005 |
| X/Y/Z RE-POSITION ACCURACY | mm | 0.003 |
| MACHINE DIMENSION | mm | 2700*2700*2560 |
| MACHINE WEIGHT | kg | 5000 |
Full Cover shield / Self-lubrication system / Working lights / Warning lights / Working condition warning lights / Self-powered electrical shutoff system / Clean air gun/ Water Tank / Transformer / Spindle air curtain and dust control system / 10000 RPM spindle / Worktable cleaning water gun
24 disc manipulator tool magazine / Crawler chips remover / NC rotary table (4 Axis) / CTS / Tool detection system / AJO / 12000 & 15000 RPM Direct connection spindle / Oil mist purifier
