Active Member
|
[China]
Address: 郑州市高新区电子商务产业员7号楼
Contact name:
Henan WadJay Machinery Co.Ltd |
|
|
Heavy Duty Universal Manual Lathe Machine Spindle Bore 52mm Bench Lathe
1 CA series ordinary horizontal lathe is used to turning internal and external cylindrical surface, conical surface, and other rotating surface, turning various metric and inch, modulus and pitch thread, and the pitch diameter of the thread and pull the drilling and oil tank etc., is general very strong horizontal lathe, Widely applicable batch processing of various shaft and disc parts.
2 The series lathe bed width in general lathe, 400mm rail width has higher stiffness, rail surface by intermediate frequency quenching, wear-resistant durable.
3 Handy machine operator concentration, slide plate is provided with a quick moving mechanism. Using single handle operation, humanization.
4 The rigidity of the machine tool structure and the transmission stiffness are higher than the general lathe, the power utilization rate is high, which is suitable for the strong cutting.
5 Before leaving the machine tool factory, the machine tool is tested strictly according to the inspection procedure, and the machine tool is tested to ensure that the machine tool has good stability and reliability.
A. CA series ordinary horizontal lathe is used to turning internal
and external cylindrical surface, conical surface, and other
rotating surface, turning various metric and inch, modulus and
pitch thread, and the pitch diameter of the thread and pull the
drilling and oil tank etc., is general very strong horizontal
lathe, Widely applicable batch processing of various shaft and disc
parts.
B. The series lathe bed width in general lathe, 400mm rail width
has higher stiffness, rail surface by intermediate frequency
quenching, wear-resistant durable.
C. Handy machine operator concentration, slide plate is provided
with a quick moving mechanism. Using single handle operation,
humanization.
D. The rigidity of the machine tool structure and the transmission
stiffness are higher than the general lathe, the power utilization
rate is high, which is suitable for the strong cutting.
E. Before leaving the machine tool factory, the machine tool is
tested strictly according to the inspection procedure, and the
machine tool is tested to ensure that the machine tool has good
stability and reliability.
| Specifications | CA6166 CA6166B CA6166C | CA6266 CA6266B CA6266C | ||
| Max .Swing over bed | 660mm | |||
| Max .Swing over carriage | 400mm | |||
| Max .Swing in gap | —— | 880mm | ||
| Effective gap length | —— | 210mm | ||
| Max .length of work piece | 750/1000/1500/2000/2200/3000mm | |||
| Width of bed | 400mm | |||
| Section of turning tool | 25×25mm | |||
| Spindle | Spindle speed | 10-1400rpm/16-1400rpm(24steps) | ||
| Hole through spindle | 52mm ,(B: 80mm),[C: 105mm] | |||
| Spindle taper | (MT6)(Φ90 1:20)[Φ113:20] | |||
| Feed | No. of feed | (64 kinds)(for each) | ||
| Range of metric threads | (1-192mm) (44 kinds) | |||
| Range of inch threads | (1-24tpi) (21kinds) | |||
| Range of module threads | 0.25-48 (module 39 kinds) | |||
| Range of diametral pitc threads | 1-96DP (37 kinds) | |||
| Tailstock | Max. tailstock spindle travel | 150mm | ||
| Tailstock spindle diameter | 75mm | |||
| Taper of tailstock spindle center hole | (MT5) | |||
| Main motor | 7.5KW(10HP) | |||
Packing dimensions (L×W×H mm) | Overall dimensions for 750mm | 2440×1140×1750 | ||
| Overall dimensions for 1000mm | 2650×1140×1750 | |||
| Overall dimensions for 1500mm | 3150×1140×1750 | |||
| Overall dimensions for 2000mm | 3650×1140×1750 | |||
| Overall dimensions for 2200mm | 4030×1140×1750 | |||
| Overall dimensions for 3000mm | 4800×1140×1750 | |||
| Weight(kg) | Length | G.W. N.W. | ||
| Overall dimensions for 750mm | 2380 2260 | |||
| Overall dimensions for 1000mm | 2570 2450 | |||
| Overall dimensions for 1500mm | 2810 2640 | |||
| Overall dimensions for 2000mm | 3050 2880 | |||
| Overall dimensions for 2200mm | 3390 3180 | |||
| Overall dimensions for 3000mm | 3930 3687 | |||
Q1.How to send my enquiry?
You can contact us by email, phone call, message (Whats APP, We
Chat, Skype).
Q2.How long can I get feedback after enquiry?
We will reply you within 3 hours in working day.
Q3.Delivery time
Machines order takes 30 days after deposit payment received. Please
inquiry sales.
Q4.What is the package? Is it suitable for shipment?
Machine is by waterproof cloth to covered. And be packed by
standard exported wooden case with steel foot. It is very much
strong for oversea transportation.
Q5.Payment term
30% T/T as down payment, balance 70% by T/T before delivery. If
others payment terms, we can discuss the details. Welcome to
inquiry sales.
Q6.Can I trust you?
Sure, we're Made in China Gold Suppliers,
Q7.How long is the warranty for machines?
Machines warranty is 12 months after receive goods. in Warranty
time,we can provide new free parts for changing.
Q8.Can you engineer come to our place to help with machine
installation & commission?
Yes, our engineers are available to travel to your place. Round
flight tickets & accommodation will be at your cost.
