Home Companies Henan WadJay Machinery Co.Ltd

1500*3000mm CNC Plasma Cutting Machine with Power Source for 20mm

Active Member

Contact Us

[China]

Address: 郑州市高新区电子商务产业员7号楼

Contact name:

Henan WadJay Machinery Co.Ltd

1500*3000mm CNC Plasma Cutting Machine with Power Source for 20mm

Country/Region	china
City & Province	zhengzhou henan
Categories	Plasma Welders

Product Details

1500*3000mm cnc plasma cutting machine with power source for 20mm

Features:

1. All-welded structure, Y,X axis with rack and linear guide drive,Z axis with electric automatic lifting,to assure cutting speed and quality.
2. X Y Z axis with leadshine drive , stable performance .
3. The set-up is very simple, all kinds of CAD graphics can be read directly by our system trough U-disk. The software can be edict graphics automatically.
4. Collocated U-disk interface and cutting code auto converting software for CAD drawing ,CAD drawing can be input directly into the cutter through U-disk.
5. Tips for each operation is displayed at the screen at any moment ,so operators can use our system without being trained or reading the instructions.
6. Collocated indicator lights for various hitches.Hitch diagnosing is clear just at a glance and the maintenance is convenient and quick.
7. There are necessary keys for the movement control in the torch carriage ,so the operator can easily move the torch to the right spot.
8. With break point or interruption of power ,memory function.

Model	Remax-1530 plasma cutting machine
Effective cutting width(X axis)	1500mm
Effective cutting width(Y axis)	3000mm
Plasma power	LGK 200A
Drive Mode	Bilateral-side
CNC system	Beijing START CNC
CNC system	Beijing START CNC
Power source	Huayuan 120A
Plasma cutting speed	50-6500mm/min
Cutting torch lifting distance	150mm
Speed setting error	≤±5%
Max idle running speed	12000mm/min
Torch height controller accuracy	≤±1.0mm
Longitudinal line accuracy	±0.2mm/10m
Motor and drvier	Stepper motor and yako driver
Gear box	Hubei planet
Drive Method	Rack and square rails for X Y Z axis
Moving Precision	0.01mm per step
Machine Voltage	220V 50/60hz ,Single phase
Power Source	380V 50/60hz ,3 phase
Plasma cutting thickness	1-40mm

1500*3000mm CNC Plasma Cutting Machine with Power Source for 20mm

We use 3 layers package

1 The inside layer,the machine is covered by thickenning platic for waterproof .

2 The middle ,the machine is covered by foam ,to protect the machine for shaking and hitting.

3 The outside we use the International standard plywood box for exportation.

1. The normal machine has been adjusted correctly before shipment.

2. You will be able to use the machine immediately.

3. You will be able to get free training suggestions about our machines on our machines.

4. You will also get free advice and consultation, technical support, and service via email/fax/telephone as well as lifetime technical support.