|
[China]
Trade Verify
Address: No. 288, Hubin Bei Road, Zhoutie Town, Yixing, Wuxi City, Jiangsu Province, P. R. China
Contact name:Wu
Wuxi CMC Machinery Co.,Ltd |
|
Verified Suppliers
|
|
|
Application: making light pole and high mast
| TECHNICAL FEATURES | |||
| 1 | Type | Multi-machine Tandem Hydraulic CNC electro - hydraulic synchro | |
| 2 | Working force | 2X400Ton | |
| 3 | Length of table | 2X7000mm | |
| 4 | distance between frames | 5600mm | |
| 5 | Throat depth | 950mm | |
| 6 | Open height | 970mm | |
| 7 | Stroke | 320mm | |
8 | Working Speed | Unload | 60mm/s |
| Working | 7mm/s | ||
| Return | 60mm/s | ||
| 9 | Main motor | 2x30kw | |
| 10 | CNC system | Type: DELEM DA53T Delem Co., Netherlands 2 (Y1,Y2)+table crowning system | |
| 11 | Tool | See the next page Table with mechanical crowning system | |
| 12 | Seal in the cylinders | NOK or SKF type | |
| 13 | Hydraulic components | BOSCH-Rexroth, Germany | |
| 14 | Hydraulic pump | SUNNY (HYTEK)USA brand made in China | |
| 15 | Linear Raster displayer sensor | FAGAR, SPAIN | |
| 16 | Main Electric Elements in cabinet | Schneider, France Brand | |
| 17 | weight | 2x50000 kg | |
| 18 | Overall size(mm) LxWxH | 2x7200x2710x5696 Above floor height: 4500 Total length with side unloading system: 17500 Total width with front support :4040 | |
| 19 | Packing: | The machine will be disassemble during transportation. | |
Details of press brake toolings
| With 1 | One set up tool holder, thickness is 18mm suitable for street pole. L=14Meters | |
| Option 1 | one set up tool,for Octagonal street pole, Min. 60mm OD octagonal taper type light pole L=14Meters | |
| Option 2 | One set multe V bottom die,for Octagonal street pole and high mast pole 150x150 14 Meters | |
| Option 3 | Double taper rate conical pole tool taper rate 11/1000 (diameter 60 ~ 236), 13/1000 (diameter 60 ~ 268), thickness of pole: 3 ~ 4mm 7 times forming type conical tool Suitable for conical pole total length of mold 16 meters, section type
| |
| Option 4 | Conical up tool support on both side up holder, 6.5m, for big side of the up tool |
| Option 5 | Pushing type Light pole side unloading system | |
| Option 6 | Remote diagnosis function. The machine supplier can assist the customer in remote fault diagnosis and remote parameter adjustment. Convenient for customers to quickly resume production. | |
| Option 7 | Light pole auto bending system Including: A. Steel plate holding trolley B. Loading crane C. Steel plate lateral roller and holding rack D. CNC plate feeding system E. Side position device F. Extension of side unloading system G. Pole side discharge system and storage rack | |
| Option 8 | Spare parts (for 400 ton model) |
Main Performance :
So it has high strength and good rigidity
The Press brake Adopting electric-hydraulic proportional valve to ensure the synchronization of both cylinder. The proportional valve is made by BOSCH-Rexroth company with very good performance such as small friction between mechanic action pairs, fine electronic amplifier and electric magnet with high controlling force and continuous action. There are two raster displayers on both sides of machine to get signal of the position of ram continuously and feed back the signal to control system, then the control system will control electric-hydraulic valve to make two cylinders synchronization on one machine.
If need two units working together, only need to rotate the switch to Synchronization position on the control panel of the main unit. Both unit position signal will be sent to CNC control system (Delem system), and output signal from CNC system will sent to proportional valve and prefill valve. To control fast down, speed change point, pressing speed and return speed to keep the two unit Synchronization with high precision
| Front of machine |
|
| Side of machine |
|
| Side unloading system |
 |
