|
[China]
Trade Verify
Address: No.288 #, Hubin bei RD, Zhoutie Town, Yixing, Wuxi City,PR.China
Contact name:Wu
Wuxi CMC Machinery Co.,Ltd |
|
Verified Suppliers
|
|
|
Model 680/2000 CNC 2000mm Light Pole Door Cutting Machine
Description:
The cutting source is automatic plasma. So the cutting speed will be much fast, and cutting edge quality is much better then flame cutting.
Application:
It is suitable for conical pole, round pole, octagonal light pole and highmast door CNC cutting, Also it can flat plate . The cutting shape can be circle, square, rectangle, elliptic type etc and any which can be draw designed by computer.
Main parameters:
| No. | Item | Parameter |
| 1 | Max. cutting length, X axis | 2000mm (for once stroke cutting) |
| 2 | Max. cutting length, X axis | 1500mm |
| 3 | Rotation angle, A axis | Any angle 0~360 degree |
| 4 | Min outer diameter | 58mm |
| 5 | Max outer diameter | 680mm |
| 6 | Max.length for pole | 12000mm |
| 7 | Max.thickness for highmast | 8mm |
| 8 | Plasma source | Hypertherm Powermax 65 (Made in USA) |
| 9 | Suggestion thickness for making hole and quality cutting. | 8mm |
| 10 | Quality Cutting speed ,thickness 4mm | 4250mm/minute |
| 11 | Quality Cutting speed ,thickness 6mm | 2550mm/minute |
| 12 | Quality Cutting speed ,thickness 8mm | 1700mm/minute |
| 13 | Max plasma edge cutting thickness(manual holding way) | Base on Plasma source 14mm |
| 14 | Light pole door cutting time | for one normal light pole electrical door, the cutting time is about 30~40 seconds) |
| 15 | Main motor/Brand | Stepless motor/Chinese |
| 16 | CNC system | Si Dafeng(SF-2100S) |
| 17 | Nesting SOFTWARE | SmartNest |
| 18 | Control axis | 3 axis, X,Y,A |
| 19 | CNC Plasma cutting torch | 1 set |
| 20 | Arc voltage height controller | HEAVTH HP105 |
| 21 | height DEVICE | Plasma Torch height moving device, 1set |
| 22 | Environmental temperature | 0-45℃ |
| Option:special big cabinet with cabinet type air condition , the CNC system and Plasma power souce inside. ( it needs additional cost) | 0-55℃ | |
| 23 | Humidity | <90%, no condensation |
| 24 | Surroundings | Ventilation, no big shake |
| 25 | Input voltage (Can be made according to buyer’s country voltage requirement.) | Single phase,220V, 50HZ Three phases, 380V, 50HZ |
