|
[China]
Trade Verify
Address: Di Ang Tian Ke, 1st Floor, Building C, No. 38 Punan Road, Huangpu District, Guangzhou
Contact name:
Guangzhou Diang Tianke Automation Equipment Co., Ltd. |
|
Verified Suppliers
|
|
|
Product Description
This product is a new generation of environmentally friendly water-based cleaning agent that takes into account detergency, low foaming properties, corrosion inhibition, etc. It has the characteristics of strong decontamination ability, good cleaning effect, and long-lasting cleaning power.
Applications
It is suitable for removing oil and scale from the surface of various steel and aluminum parts, as well as pre-washing before electrostatic spraying and painting, etc.
Product Advantages
★No foaming when cleaning under high pressure, no clogging of nozzles, and high cleaning efficiency;
★Strong cleaning power, can quickly peel off stubborn dirt and prevent its redeposition;
★Can be reused multiple times, effectively reducing production costs;
★Environmentally friendly product, does not contain nitrite and other toxic ingredients that are harmful to the human body
★Has good corrosion resistance, does not damage the workpiece, and does not affect accuracy;
★Easy to rinse, does not affect subsequent processing.
Typical Data
| Serial Number | Project | Unit | Numerical Value | Detection method | |
| 1 | Exterior(Original solution) | -- | Yellow transparent liquid | Visual inspection | |
| 2 | Exterior(5% dilution) | -- | light yellow transparent liquid | Visual inspection | |
| 3 | Density (at 20°C) | g/cm³ | 1.03 | IP365 | |
| 4 | odor | -- | slight odor | --- | |
| 5 | PH Value(5% dilution) | -- | 10.0 | BS1647 | |
| 6 | Anti-rust (5% dilution) | Iron | -- | 0% | IP287 |
| Aluminum | -- | A | GB/T6144 | ||
Note: The above are typical data and do not represent product indicators. Material safety data for the above products are available upon request. The above data can be used to obtain corresponding information on storage, safe handling and disposal. The above data has been tried to be as accurate as possible, but may change due to future recipe changes.
Common cleaning processes
Spray cleaning - Spray cleaning - Rinsing - Rinsing - Rinsing - Drying
Precautions for use
1. Cleaning method: ultrasonic cleaning, immersion cleaning or high-pressure spray immersion cleaning. The recommended cleaning time is 3 to 10 minutes (the best effect is adjusted according to actual conditions);
2. Heated cleaning, it is recommended that the temperature be controlled at 60-70℃;
3. Change the cleaning agent regularly to avoid affecting the cleaning effect;
4. If the operator is in contact with the cleaning agent for a long time, it is recommended to wear rubber gloves to avoid degreasing;
5. After cleaning, the workpiece should not be in direct contact with hands to avoid sweat spots and rust;
6. In order to achieve the best cleaning effect, it is recommended to use a cleaning method of 3 to 5 tanks.
Storage and packaging
★ Store in a cool and ventilated place, away from sunlight and rain;
★ The shelf life is 18 months at room temperature and stored as general chemicals;
★ 15Kg/plastic barrel, 170Kg/iron barrel.
Health and Environment
This product does not contain nitrite carcinogens, phenols and other highly toxic substances, and does not contain phosphorus, which is more conducive to environmental protection.
Other Information
For more information on environmental matters, health protection, fire protection matters, emergency protective measures, waste disposal and cargo transportation, please refer to the "Logistics Safety Data Sheet MSDS".
