|
[China]
Trade Verify
Address: No. 4, South 1st Road, Lianhe Industrial South District, Luocun, Shishan Town, Nanhai, Foshan City
Contact name:Lei Xiaoyan
FOSHAN LIDEXIN MACHINERY MANUFACTURING CO., LTD. |
|
Verified Suppliers
|
|
|
LDX-028A Manufacturers supply double grinding head side grinding machine
The working principle of the disc grinding wheel gear grinding machine is introduced:
1,After grinding each tooth, the dividing head frame passes through the dividing plate. The machine can also be used to grind helical teeth with additional equipment. The inner gear can be ground if a grinding wheel is inserted into the inner gear.
2,The vertical layout is used when the machining diameter is greater than 1 meter, and the accuracy can reach 4 levels, which is suitable for grinding high-precision gears.
3,It is especially suitable for gears with few teeth. The speed of the feed slide of the grinding head is uneven or there is impact phenomenon, and the hydraulic speed regulating valve is faulty. Remove the speed regulating valve and clean or replace it. Solenoid valve failure, remove cleaning or replace. If the guide rail is not parallel properly, loosen the adjusting screw and readjust it.
| Technical parameters: |
| Saw web machining diameter range:￠100-￠800mm |
| Saw web bore diameter: 12-220mm |
| Thickness of saw web (steel plate):1-7mm |
| Tooth pitch: 5-80mm |
| Front inclination angle, inclination angle: 5°-15° |
| Radial angle: 3°-15° |
| Operating speed: 18 teeth/min |
| Feeding stroke: 1-28mm (stepless variable speed) |
| Grinding wheel dimensions: 80*100*32mm |
| Grinding speed: 26m/s |
| Coolant pump flux: 501/min |
| Coolant cylinder volume: 90L |
| Total power: 4.3KW |
| Voltage: Three-phase 380v |
| Weight: 1,100KG |
| Outer diameter dimensions: 1.75*1.4*2.0mm |
| Technical characteristics: |
| An intuitive and simple whole Chinese operation interface is
matched with a large-sized touch screen, so the equipment is easier
to operate, and all preset procedures or self-compiled procedures
are more convenient to call; the servo tool setting device features
accurate positioning, so the product grinding accuracy is greatly
ensured. Due to the adoption of high-quality and high-accuracy
castings and machined parts, the service life of the equipment is
greatly prolonged, and the equipment is simple and easy to operate
and maintain; one person can operate many pieces of equipment at
the same time, so the production efficiency is greatly improved,
and the cost is reduced. |
