|
[China]
Trade Verify
Address: No. 4, South 1st Road, Lianhe Industrial South District, Luocun, Shishan Town, Nanhai, Foshan City
Contact name:Lei Xiaoyan
FOSHAN LIDEXIN MACHINERY MANUFACTURING CO., LTD. |
|
Verified Suppliers
|
|
|
LDX-020A grinding diameter 200-1200MM automatic TCT saw blade sharpening machines
Gear grinding machine precautions:
1,Before grinding the saw blade, it is necessary to check the wear of the saw blade, and determine the grinding frequency and grinding depth according to the situation
2,When adjusting the gear grinding machine, it is necessary to determine the appropriate grinding Angle and position according to the tooth shape and wear of the saw blade.
3,In the process of grinding, it is necessary to maintain a certain speed and depth, and pay attention to the pitch and tooth height of the saw blade.
4,After grinding is complete, the saw blade needs to be cleaned and the necessary trimming and calibration is carried out.
Adjust the gear grinding machine:
1,Before starting grinding, the gear grinding machine needs to be adjusted to the appropriate Angle and position. In general, it is necessary to adjust the grinding stone of the gear grinding machine to a position parallel to the tooth slot of the saw blade, and to ensure that the saw blade can rotate freely when it is fixed on the gear grinding machine.
| Technical parameters: |
| Processing saw blade diameter range: ￠200- ￠1200mm |
| Saw blade aperture: ￠10-220mm |
| Saw blade thickness (steel plate): 1-12mm |
| Tooth pitch: 7-110mm |
| Tooth surface angle: 5 degrees to+20 degrees |
| Tooth top back angle: 1-20 degrees |
| Left and right inclination of teeth: tooth tip/tooth surface 20 degrees |
| Blade grinding stroke range: maximum 25mm (adjustable) teeth/minute |
| Grinding speed: 0.5-6mm/s |
| Working speed: maximum 20 teeth/minute |
| Grinding wheel size (outer diameter x hole): (￠ 125mm x ￠ 32mmX1mm) |
| Negative chamfer grinding: -15 degrees |
| Grinding wheel linear speed: 26m/s |
| Flow rate of coolant water pump: 501/min |
| Volume of coolant cylinder: 85L |
| Total power: 1.85 kW |
| Voltage: three-phase 380v |
| Mechanical weight: 800KG |
| Mechanical dimensions (length x width x height): 1600X1100X1800mm |
| Technical features: |
| 1. This equipment can grind aluminum TCT cutting TCT saw blades, woodworking saw blades, and large alloy saw blades. It is easy to operate and can fully extend the service life of alloy saw blades. Each blade can be reused 15-30 times. This equipment has received praise from many buyers. |
