|
[China]
Trade Verify
Address: No. 4, South 1st Road, Lianhe Industrial South District, Luocun, Shishan Town, Nanhai, Foshan City
Contact name:Lei Xiaoyan
FOSHAN LIDEXIN MACHINERY MANUFACTURING CO., LTD. |
|
Verified Suppliers
|
|
|
LDX-026A Saw Blade Diameter 500MM-2200MM Large Carbide Saw Blade Automatic Grinding Machine
Product application:
1,This machine is designed for grinding large alloy saw blades
2,High automation, simple operation and easy to learn
3,Angle sharpening of the saw blade is possible
4,Any combination of tooth shapes can be completed in one go
Grinding saw blade:
1,First, the saw blade needs to be fixed on the gear grinding machine through the appropriate fixture. When fixing the saw blade, it is necessary to determine the starting point and end point of grinding according to the tooth pitch and tooth height of the saw blade.
2,According to the tooth shape of the saw blade and the required grinding effect, the position, Angle and depth of the grinding stone need to be adjusted. It should be noted that different saw blades have different grinding requirements, which need to be adjusted according to the specific situation of the saw blade when adjusting the gear grinding machine.
3,Before starting grinding, it is necessary to turn on the grinding machine and maintain a certain grinding speed and depth. In the process of grinding, it is necessary to move the grinding stone of the gear grinding machine to the corresponding position according to the pitch and tooth height of the saw blade. After grinding a row of teeth, the saw blade needs to be turned over and ground again. Throughout the grinding process, it is necessary to pay attention to the depth of grinding, not too deep or too shallow to cause damage to the saw blade.
| Technical parameters: |
| Processing saw blade diameter range: ￠500- ￠ 2200mm |
| Saw blade aperture: ￠ 10-220mm |
| Saw blade thickness (steel plate): 1-12mm |
| Tooth pitch: 7-120mm |
| Tooth surface angle: 5 degrees to+30 degrees |
| Tooth top back angle: 6-45 degrees |
| Left and right inclination of teeth: tooth tip/tooth surface 45 degrees |
| Blade grinding stroke range: maximum 25mm (adjustable) teeth/minute |
| Grinding speed: 0.5-6mm/s |
| Working speed: maximum 20 teeth/minute |
| Grinding wheel size (outer diameter x hole): (￠ 125mm x ￠32mmX1mm) |
| Negative chamfer grinding: -27 degrees |
| Grinding head rotatable angle: 90 degrees and 180 degrees |
| Grinding wheel linear speed: 26m/s |
| Flow rate of coolant water pump: 501/min |
| Volume of coolant cylinder: 85L |
| Total power: 2.2 kW |
| Voltage: three-phase 380v |
| Mechanical weight: 1200KG |
| Mechanical dimensions (length x width x height): 1900X1400X2000mm |
| Technical features: |
| The design of this machine refers to the characteristics of similar domestic and foreign models, absorbs and analyzes the advantages of the same type, and makes some functional improvements. This equipment is specifically designed for grinding large alloy saw blades. |
| 1. Pre set multiple sets of tooth profiles for one click multifunctional operation. |
| 2. The flat teeth of the ladder can be completed in one go, with CNC grinding and any tooth shape, which can increase efficiency by three times; Improved gear extraction operation to improve accuracy and extend service life. |
