Active Member
|
[China]
Contact name:Nancy Shen
Guangdong Sanwood Technology Co.,Ltd |
|
|
3 layers High and Low Temperature Explosion-proof Climatic Chamber
3-layer High and Low Temperature Explosion proof Climatic Chamber Characteristic:
1.Explosion-proof High and Low Temperature Test Chamber is composed of the chamber, refrigeration systems, heating systems, air circulation system and control system.
2.The Battery Explosion-proof High and Low Temperature Test Chamber is made of high quality SUS#304 stainless steel material,the outer shell adopts A3 steel plate,surface electrostatic spraying.
3.Insulation system uses superfine fiberglass wool or polyurethane foam so as to ensure the temperature of inside chamber.
4.Sanwoood self-develop programmable touch screen temperature controller, with automatic calculation of PID function and remote control to Ethernet.
5.Adopts steam humidifying method, automatic water circulation loop,with functions of automatic filling water.
6.Refrigeration system adopts original France "Tecumseh" refrigeration unit and full sets of refrigeration parts.
7.Input mode PT100 sensor.
8.The system of heating up, heating down, dehumidifying, and humidifying can be operated independently so as to reduce the cost of testing, extend the operating life of the machine and decrease the failure rate.
9.Powerful multi-wing type air circulation which can ensure even
temperature distribution inside the working chamber.
10.With larger transparent viewing window and lighting inside to
observe the test.
11.Door seal adopts silicone rubber material which can avoid aging
and hardening in high and low temperature conditions.
12.Standard configuration with one test hole on the left side of
the chamber for easy testing operation and temperature measurement.
13.With various of safety protection device such as leakage and
outage protection,compressor overpressure protection,overload
fusing protection,audio signal alarm.
| Standard configuration: |
| Cable port with silicone plug φ100mm x2 |
| Emergency stop switch |
| USB interface and history data review and converting software |
| Over temperature protection |
| Status indicator light |
Optional configuration:
| Multi-temperature Probe | Hydrogen induction device |
| Automatic fire extinguishing CO2 device | Intake and exhaust device |
| Explosion-proof chains | Pressure relief vent |
| Extinguishing manual/Auto | Smoke monitor |
Technical specification:
| Model | SM-G-80-DA-3 | SM-G-150-DA-3 | SM-G-225-DA-3 | SM-G-408-DA-3 | SM-G-800-DA-3 | SM-G-1000-DA-3 | |
| Temperature control range | RT+10℃ ~ 300℃ (A: +25℃ ~ 200℃; B: +25℃ ~ 300℃) | ||||||
| Temperature fluctuation | ±0.5℃ | ||||||
| Heating rate | 25.0℃～100.0℃ Within 8 mins (6.0～10.0℃/min) | ||||||
| Temperature uniformity | ±2.0℃ (25.0℃～100.0℃); ±2.5℃ (100.1℃～200.0℃) | ||||||
| Internal material | Adopts 1.2mm thickness stainess steel(SUS304) | ||||||
| External material | Adopts 1.2mm thickness Cold rolled steel sheet / powder spraying | ||||||
| Heat insulating material | 100mm thickness polyurethane plate＋10mm thickness mineral wool | ||||||
| Interior size(mm) W*H*D | 500*500*400 | 500*600*500 | 500*750*600 | 800*850*600 | 1000*1000*800 | 1000*1000*1000 | |
| Outer size(mm) W*H*D | 700*1680*1180 | 700*1720*1275 | 700*1930*1290 | 1000*2050*1400 | 1200*2100*1590 | 1200*100*1780 | |
| Working Volume(m³) | 80L | 150L | 225L | 408L | 800L | 1000L | |
| Power supply | 380V AC 50/60Hz | ||||||
| Controller | SANWOOD | ||||||
Other sizes and models can be customized.
