Home Companies ASLi (CHINA) TEST EQUIPMENT CO., LTD

Mechanical Shock Test Equipment Shock Test Machine For Li-ion Battery Modules Test with UN38.3 and IEC62281

Active Member

Contact Us

[China]

Address: No. 7, 1/F, Bldg. C, Jinhui Industrial Park, Jiuxibian Village, Lixin Community, Dongcheng Dist.

Contact name:Doris

ASLi (CHINA) TEST EQUIPMENT CO., LTD

Mechanical Shock Test Equipment Shock Test Machine For Li-ion Battery Modules Test with UN38.3 and IEC62281

Country/Region	china
Categories	Polishers

Product Details

Mechanical Shock Test Equipment Shock Test Machine For Li-ion Battery Modules Test with UN38.3 and IEC62281

Mechanical Shock Test Equipment Shock Test Machine For Li-ion Battery Modules Test with UN38.3 and IEC62281 Application:

Acceleration Mechanical Shock Tester is mainly used for small products for impact test, to assess the product's ability to withstand shock damage. It is often used in electronic components, electronic circuit boards and other environmental testing.

Mechanical Shock Test Equipment Shock Test Machine For Li-ion Battery Modules Test with UN38.3 and IEC62281 features:

1. Built-in self-protection device, no secondary impact.
2. Shock height controlled by digital.
3. Good repeatability test data.
4. Signal generator provides a variety of choice: Half sine wave, trapezoidal wave, sawtooth wave, square wave, etc.
5. Good vibration isolation performance, impact on the environment can control within the scope of the requirements.
6. Good Safety performance.
7. Conform to the IEC, MIL, GJB, JIS, ASTM and other international and domestic standard shock waves;

Short introduction about ASLi factory:

We are a long history testing equipment manufacturer, in the past 25 years, we devoted to simulation environmental testing equipment and Mechannical vibration and shock testing machine. Mechanical Acceleration Shock Test system is our star products, and we had obtained the CE certification for this machine.

After-sale service:
Feedback within 2 hours, and offer solution in 4 hours and help to solve the problems.

Package: PP film first, and then 10mm foam between machine and the case, and outside is standard export plywood case.

Mechanical Shock Test Equipment Shock Test Machine For Li-ion Battery Modules Test with UN38.3 and IEC62281 parameters:

Model		SS-5	SS-10	SS-25	SS-50	SS-100	SS-200	SS-400
Load Capacity (Kg)		5	10	25	50	100	200	400
Table Size (mm)		120x120	200x200	350x350	450x450	650x650	750x750	850x850
Pulse Acceleration (m/s2)	Half Sine Wave	150~15000	150~15000	150~15000	150~6000	150~6000	150~3500	150~1500
	Trapezoid Wave	300~1000	300~1000	300~1000	300~1000	300~1000	300~1000	300~500
	Sawtooth Wave	150~1000	150~1000	150~1000	150~1000	150~1000	150~1000	150~500
Pulse width	Half Sine Wave	0.5~18	0.6~18	0.8~25	1.5~30	1.5~30	2~30	6~30
	Trapezoid Wave	6~12	6~12	6~18	6~12	6~12	6~12	6~12
	Sawtooth Wave	6~18	6~18	6~18	6~18	6~18	6~18	6~18
Drive Mode		Mechanical drive					Hydraulic drive
External Dimension WxHxD (mm)		800x2200 x900	800x2200 x900	850x2250 x950	1000x2600 x1300	1100x2700 x1400	1300x2700 x1600	1300x2700 x1650
Weight (Kg)		600	700	900	2600	3300	4000	4500
Hydraulic Oil		No #46 hydraulic oil
Power		AC 380V 50/60HZ

Hot Products

High and Low Temperature Shock Environmental Test Chamber Temperature Fast Change Rate

Contact Us

ASLi (CHINA) TEST EQUIPMENT CO., LTD

Mechanical Shock Test Equipment Shock Test Machine For Li-ion Battery Modules Test with UN38.3 and IEC62281

Product Details

Hot Products

High and Low Temperature Shock Environmental Test Chamber Temperature Fast Change Rate

Benchtop Environmental Test Chamber , Laboratory Desktop Small Humidity Chambers

Temperature Humidity Vibration Combined Environmental Test Chamber Climatic Testing System For Battery

Humidity Temperature Environmental Combined Vibration Test Chamber Climatic Labortory Testing

Touch Screen Temperature & Vibration Combined Environmental Test Chamber

Constant Temperature Humidity and Vibration Environmental Simulation Test System