Active Member
|
[China]
Address: No. 7, 1/F, Bldg. C, Jinhui Industrial Park, Jiuxibian Village, Lixin Community, Dongcheng Dist.
Contact name:Doris
ASLi (CHINA) TEST EQUIPMENT CO., LTD |
|
|
Environmtntal Three-box Type Thermal Shock Test Chamber for National Defense Industry
Electric Tester/ Thermal Shock Chamber / Features:
1.Stainless Steel Cold Thermal Shock Test Chamber for Electronic
Industry is divided into three boxes: high temperature, low
temperature, and the testing area, testing products placed on the
testing area; when testing, the valve , which drove by
cylinder,lead the high temperature or low temperatures into the
testing area. The test sample is in static mode.
2.Using touch-ontrol graph control as operation interface, easy to
operate.
3.Applying wind route conversation to the shock method to
distribute temperature to the testing zone for cold and thermal
shock measurement.
4.For high temperature shock or low temperature shock, maximum time
is up to 999H, and maximum circulation cycles are 9999 times.
5.The system can be used for automatic Circulation Shock or manual
selective shock.
6.Adopt binary cooling system, with quick cooling effect. Cooling
method is water cooling.
7.Can entering normal temperature. R232 and R485 communication
interface.
Application:
Electric Tester/ Thermal Shock Chamber is used to test the
capability of material structure or composite materials to
withstand the continuous environmental changes between extremely
high temperature and low temperature during a short period, and
therefore understand the chemical changes or physical damages
caused by expansion from heat and contraction from cold in the
shortest possible time. It is applicable to metals, plastic,
rubber, electronics amongst other materials. The test result can be
used as a reference or basis for product improvement.
Stainless Steel Cold Thermal Shock Test Chamber for Electronic Industry Technical Parameters:
| Model | TS-42(A~C) | TS-80(A~C) | TS-150(A~C) | TS-252(A~C) | TS-450(A~C) | ||||
Internal Dimension WxHxD ( mm) | 400x350x350 | 500x400x400 | 600x500x500 | 700x600x600 | 800x750x750 | ||||
External Dimension WxHxD (mm) | 1400x1800x1400 | 1550x1950x1550 | 1600x2000x1700 | 1700x2100x1750 | 1800x2200x1900 | ||||
Temperature Range of Testing zone | Type A:-40 ºC~+150ºC(200ºC is Optional) | Type B:-55ºC ~+150ºC (200ºC is Optional) | Type C:-65ºC ~+150ºC(200ºC is Optional) | ||||||
High temperature Range of Testing zone: +60~+150ºC (200ºC is Optional); Low Temperature Range of Testing Zone: -10ºC~-40ºC/-55ºC/-65ºC | |||||||||
Exposure Time of High /Low Temperature | Exposure Time of High Temperature:+60ºC~+150ºC(200ºC is Optional) 30Mins | ||||||||
| Exposure Time of Low Temperature:-10ºC~Type B:-40ºC/ Type B -55ºC/ Type C -65ºC 30Mins | |||||||||
Temperature of Heat-Storing Slot /Heating Time | RT~200ºC/About 45mins | ||||||||
Temperature of Cool- storing Slot/Cooling Time | RT~-75ºC/ About 100mins | ||||||||
Temperature Recovery Time/ Conversion Time | ≤5min/≤5sec | ||||||||
Precision Temperature Control / Distribution Accuracy | ±0.5ºC/±2ºC | ||||||||
Internal and External Material | Material of the inner box is SUS 304# stainless steel,of the outer box is stainless steel or see cold-rolled steel with paint coated. | ||||||||
| Insulation Material | High temperature resistant, high density, formate chlorine, ethyl acetum foam insulation materials | ||||||||
| Mechanics | P.I.D+S.S.R+ Micro-computer balanced temperature control system | ||||||||
| Cooling System | Semi-hermetic double-stage compressor(water-cooled type) /Hermetic double-stage compressor (air-cooled type) | ||||||||
Security Protection Devices | Non-fuse breaker, high and low pressure protective switch of the compressor ,refrigerator high-pressure protective switch, failure warning system, electronic alarm | ||||||||
| Accessories | viewing window(special order) | ||||||||
| Compressor | French Tecumseh Brand, German Bizer Brand | ||||||||
| Power | AC220V 1 ø 3 lines,50/60HZ, AC380V 3ø 5 lines,50/60HZ | ||||||||
| Weight (Approx) | 450 | 600 | 750 | 950 | 1200 | ||||
Stainless Steel Cold Thermal Shock Test Chamber for Electronic Industry Pictures:
Our concept:
1.Client is first. We are trying to bring maximum profit to our
clients and offer best quality products
2.Credibility is the most important.
3.Quality control is our life.
4.Great sense of responsibility
Customers' Visit ASLi Factory:
Exhibition:
FAQ
