|
[China]
Trade Verify
Address: No.2, Zhifu Road, Mowu, Wanjiang District, Dongguan, Guangdong, China
Contact name:Vickey Jin
Dongguan Liyi Environmental Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
IEC60529 Standard IPX1 IPX2 Waterproof Test Machine 1400*1400*1400mm Size
IEC60529 Standard IPX1 IPX2 Water Circulation Rain Test Chamber for
Outdoor Sofa
Background:
The destruction of products and materials by natural water
(rainwater, sea water, River water, etc.) has caused incalculable
economic losses every year. The damage mainly includes corrosion,
fading, deformation, strength reduction, expansion, mildew and so
on. Especially, electrical products are easy to cause fire because
of short circuit caused by rainwater. Therefore, it is an essential
and key procedure to carry out the shell protection water test for
specific products or materials.General application fields: Outdoor
lamps, household appliances, automotive accessories and other
electronic and electrical products.
Function of the equipment:
The main function of the equipment is to test the physical and
other related properties of electronic and electrical products,
lamps, cabinets, electrical components, automobiles, motorcycles
and their components under simulated rainy weather conditions.
After testing, the performance of the product can be judged by
verification, so as to facilitate the design, improvement,
verification and factory inspection of the product.
Related standards:
It meets the requirements of IEC60529:2013, GB4208-2017 enclosure
protection level (IP code) 14.2.1, 14.2.2 and figure 3, and
GB7000.1 luminaires Part 1: General requirements and tests 9.2.3.
Machine features:
1. It is suitable for ipx1 and ipx2 waterproof grade test.
2. The cabinet of the equipment adopts double structure design of
inner box and outer shell. The shell is made of domestic
high-quality A3 steel plate, and the surface is sprayed with baking
paint, which is beautiful and durable.
3. Rainplate, inner box of equipment, turntable and other water
related parts are all made of SUS304 stainless steel to ensure no
rust during long-term use.
4. The drip tank adopts vacuum design and SUS304 stainless steel
structure; the nozzle base adopts patented technology of brass
cone, which is convenient for quick replacement of drip needle.
5. The water supply pipeline is equipped with a precision filter to
filter the impurities in the water and prevent the needle from
blocking.
6. It has the function of compressed air drainage. After the test
is completed, the excess water in the drip tank and the needle head
can be removed to avoid clogging the pinhole due to water
accumulation and scaling for a long time. (Note: the gas source
should be provided by the user)
7. Step motor is used in the sample stage, and the rotation speed
and standard angle can be accurately set on the touch screen. The
standard speed of ipx1 is 1R / min; the ipx2 angle test can be
completed automatically. The requirement of drips rain at 4
positions for 2.5min respectively.
8. The test box is equipped with sample power socket (standard
configuration ac220,10a; it can be customized according to needs).
The power on and off time program control of sample power supply:
power off (0-999min) - power on (0-999min) - power off (0-999min),
which is suitable for live test of samples.
9. The LED waterproof lamp is installed in the test box, and the
observation window is made of toughened glass, which is convenient
to observe the test situation in the box.
10. Equipment built-in circulating water tank, circulating water,
water tank structure is easy to clean design. The water level of
the water tank is controlled automatically, and the alarm detection
of high and low water level is provided.
11. The core control components are 7-inch touch screen + Panasonic
PLC; the electrical components are imported brands such as LS and
OMRON.
12. UI control function: independent development of IPX waterproof
grade test operation interface, directly select the waterproof
level, automatically test according to the standard waterproof
level conditions; simple and intelligent.
13. The base of the equipment is equipped with 4 movable casters,
which is convenient for moving and fixing.
14. The case is equipped with embedded spare parts box, which is
convenient to place common spare parts (such as hexagon screw
driver, filter element, needle, etc.).
15. Use digital flow meter and connect with signal from the
controller. Only need to set the flow on the controller, do not
need manually adjusting, the whole test fully automatic.
Technical parameters:
| Structure Parameters | |
| Dripping board size | L 1200 * D1200 * H40mm |
| Inner chamber size | L 1400 * D1400 * H1400mm |
| Machine overall size | L 2050 * D1800 * H2050mm |
| Dripping nozzle diameter | ￠0.4mm |
| Dripping nozzle spacing | 20*20 mm |
| Sample turntable size | ￠800 mm |
| Function Parameters | |
| Rainfall | 1-3mm/min(±0.5mm/min) |
| Flow regulation mode | Automatic adjusting |
| Lifting mode of drip board | Can not be lifted(fixed) |
| Turntable lifting height | 650-1100 mm |
| Turntable max load | 50KG |
| Turntable Inclination angle | 0° or 15°(horizontal direction) |
| Turntable turning speed | 1 r/min(IPX1) |
| Test time | 0-999 min |
| Safety protection device | Leakage protection, water shortage protection and short circuit protection |
| Electrical Parameters | |
| Power source | AC220V±10% ；50Hz |
| Sample load power supply | AC220V±10% ；50Hz |
| Power rate | 1.0kw |
During the whole business process, we offer Consultative Selling service.
1)Customer inquiry process:
Discussing testing requirements and technic details, suggested suitable products to customer to confirm. Then quote most suitable price according to customer requirements.
2)Specifications customize process:
Drawing related drawings to confirm with customer for customized requirements. Offer reference photoes to show the proucts appearance. Then, confirm the final solution and confirm final price with customer.
3)Order process:
We offer below business term:
| Accepted Delivery Terms: | FOB, CFR, CIF, EXW, DDP |
| Accepted Payment Currency: | USD, EUR, HKD, CNY |
| Accepted Payment Type: | T/T, L/C, Credit Card, PayPal, Western Union, Cash, Escrow |
| Nearest Port: | Shenzhen, Guangzhou, Shanghai, Qingdao, Tianjing or rquired |
4)Production and delivery process:
We will produce the machines according to confirmed PO requirements. Offering photoes to show production process.
After finish production, offer photoes to customer to confirm again with the machine. Then do own factory calibration or third party calibration(as customer requirements). Check and test all the details and then arrange packing.
Deliver the products in confirmed shipping time and inform customer.
5)Installation and after sale service:
Defines installing those products in the field and providing after-sales support.
