|
[China]
Trade Verify
Address: No. 50, tonghe road, wei ting science park, industrial park, suzhou city, jiangsu province, China
Contact name:Guoliang.Qiing
suzhou jintai antistatic products co.ltd |
|
Verified Suppliers
|
|
|
1. The cellulose polyester wiper is constructed of 55% woodpulp and 45%. The material is soft
and will not scratch or damage the clean surface.
2. Used with cleaning solution.
3. Super absorbent ability, more than four times faster than ordinary cotton cloth.
4. High efficiency in removing water stains and oil stains without using any chemical adhesive.
5. Because of the production in the purification room, the impurities involved in the wiping paper are
avoided, which can reduce the production of printing defects caused by the impurities in the steel net
during the printing process.
6. It can be packaged with anti-static packaging to meet the strict anti-static requirements for electronic
products.
Product | Base | Edge | Size(inch) | Packaging | Class | ||
PCS/bag | Bags/case | Packaging Method | |||||
CLN-1014 | 145 | Laser cutting | 9"*9" | 100pcs/bag | 10bags/case | Vacuum packaging | 10-1000 |
CLN-1014H | 110 | Laser cutting | 9"*9" | 100pcs/bag | 10bags/case | Vacuum packaging | 10-1000 |
CLN-1015A | 160 | Laser cutting | 9"*9" | 100pcs/bag | 20bags/case | Vacuum packaging | 100-1000 |
CLN-1015 | 160 | Laser cutting | 9"*9" | 100pcs/bag | 20bags/case | Vacuum packaging | 100-1000 |
CLN-1016 | 145 | Laser cutting | 9"*9" | 100pcs/bag | 20bags/case | Vacuum packaging | 100-1000 |
CLN-1016H | 110 | Laser cutting | 9"*9" | 100pcs/bag | 10bags/case | Vacuum packaging | 10-1000 |
CLN-1017 | 160 | Laser cutting | 9"*9" | 100pcs/bag | 10bags/case | Vacuum packaging | 10-1000 |
CLN-1017H | 160 | Laser cutting | 9"*9" | 100pcs/bag | 10bags/case | Vacuum packaging | 10-1000 |
Application Field
Polyester cleanroom wiper is widely used in cleaning the surface of high standard. It's dedicated to wipe
paper for the electronics industry PCB SMT printing, can effectively remove dust attached to the printer on
the stencil, PCB excess solder paste, red glue, etc., keep the electronic circuit board spotless, thus greatly
reduce rejection rate, greatly improve production efficiency and product quality.It can be used for all
automatic printing machines such as MPM, DEK, KME, YAMAHA, MINAMI, JUKI, EKRA, ert, FUJI, SANYO,
etc.
Features
The characteristic of Products:
1, Cleaning it with the water of grade of 18MΩ01, and use the dust free package.
2, It is soft, it will not damage the surface of the material.
3, High efficient water suction ability.
4, Good absorbing water and other solution
5, Laser cutting and particle out
6, It is not easy to cause the chemical reaction.
Product Show
Any Questions,Welcome Here!
Contact:Qing
Phone / Whatsapp / Wechat:+139 1260 5370
Tel: (86)-512-65951876
Fax: (86)-512-65951872
Address:No. 50, tonghe road, wei ting science park, industrial park, suzhou city, jiangsu province, China.
