|
[China]
Trade Verify
Address: Room No.5, 15th Floor, Yuyang Plaza, Bayiqizhong Rd, Fuzhou, P. R. China
Contact name:
JINHUA (QINGDAO) HARDFACING TECHNOLOGY CO., LTD. |
|
Verified Suppliers
|
|
|
Vertical Cladding Machine
Machine Overview
Vertical Cladding Station is fully automated PLC based Hot Wire
GTAW cladding station which shall be fixed in the workshop. There
will be a water cooled Torch mounted on slides arcing with the
rotating job and the filler wires fed automatically in the weld
pool.
The welding torches will be quick change (1G/2G) type which shall give total flexibility to the machine. The welding parameters like current, voltage, welding speed, wire feed, step over etc will be programmable and controllable via PLC and will have overrides through a hand held wireless remote pendant.
Product Details
| Model: | JH-350S |
| Weld Process: | Hotwire TIG (HW-GTAW) |
| Manipulator: | 10x13 with heavy-duty motorized cross-slides |
| Turntable: | 6 foot diameter table, 15 ton capacity with slip ring |
| Standard Power Source: | Miller Maxstar 700 with Coolmate 3.5 cooler, Maxstar 200 DX |
| Optional Power Source: | Other power sources are available |
| Maximum Height Bore Depth: | Up to 78.7 in (2000 mm) depending on torch type and vertical slides used |
| Minimum Weldable Bore: | 1.77 in (45 mm) diameter |
| Water Cooled TIG Torch: | Various fixed and adjustable-angle torch heads available |
| Welding Speed: | 7.87 in/min to 17.7 in/min (20 to 45 cm/min) |
| Air Pressure: | Requires 3-4 bar / 45-60 psi |
| Control: | KEY 1250 PLC Controller |
| Control Functions: | Controlled by 15 in TFT HMI or remote pendant |
| Input Power JH-350S: | (controller, manipulator, turntable) - 380 to 480 V, 3 phase, 50/60 Hz |
| Input Power Miller Power Sources: | Maxstar 700 and Maxstar 200DX - 380 to 480 V, 3 phase, 50/60 Hz |
| Input Power Miller Cooler: | Coolmate 3.5 - 115 VAC 50/60 Hz (from power source) |
| Overall Height: | 216.5 in (5500 mm) |
| Shipping Weight: | 21,054 lb (9550 kg) complete system |
