Home Companies RULETEAM CONNECTION TECHNOLOGY (SHENZHEN) CO.,LTD

5.08mm Pitch Brass Female Connector Terminals , Tin-Plated Connector Crimp Terminal

RULETEAM CONNECTION TECHNOLOGY (SHENZHEN) CO.,LTD

Contact Us

[China] country

Trade Verify

Address: No.A1507H2 Xinhe Century Building, 3069 Caitian Rd, Gangxia Community, Futian District, Shenzhen City, China

Contact name:Ricky Zou

Inquir Now

RULETEAM CONNECTION TECHNOLOGY (SHENZHEN) CO.,LTD

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

5.08mm Pitch Brass Female Connector Terminals , Tin-Plated Connector Crimp Terminal

Country/Region china
City & Province shenzhen guangdong
Categories Terminals
InquireNow

Product Details

 

C6350M-T Wire Connector Terminals AWG#20 - 14 Brass 6.35mm ptich

 

1, The specification of the product including basic size information, electrical and mechanical properties.

 

Basic size information
Termination Interface StyleCrimp or compression
Processing methodsE-stamping before tin-plated  
Insulation O.D.2.50mm(Max)
Part No.C5080F-T
ApplicationSignal
Package7K/reel
 
Electrical properties
Current Rating10A AC, DC
Voltage Rating250V AC, DC
Contact Resistance10mΩ Max
Insulation Resistance1000mΩ min
Withstanding Voltage1500V AC/minute
 
Mechanical properties
Temperature range-25℃ to 85 ℃
Other information please kindly check the following picture.

 

 

2, Related drawing and report

 

The following pictures are engineering drawing and testing report for your reference, wish these can help you to purchase the ideal and right parts from us. Thank you!

5. Mechanical Performance

 

Test DescriptionProcedureRequirement
5-1Actuator Insertion & Withdrawal ForceInsert and withdraw connectors at the speed rate of 25±3mm / minute.Refer to paragraph 7
5-2Crimping Pull Out ForceFix the crimped terminal, apply axial pull out force on the wire at the speed rat of 25±3mm / minute.(Based upon JIS C5402 6.8)AWG#1411.0kgf (Min)
AWG#1610.0kgf (Min)
AWG#189.0kgf (Min)
AWG#206.0kgf (Min)
AWG#224.0kgf (Min)
AWG#243.0kgf (Min)
5-3Terminal Insertion Force.Insert the crimped terminal into the housing.2.00kgf (Max.)
5-4Terminal/Housing Retention Force.Apply axial pull out force at the speed rate of 25±3mm / minute on the terminal assembled in the housing.3.00kgf (Min.)
5-5Pin Retention ForceApply axial push force at the speed rate of 25±3mm / minute2.0kgf (Min.)
5-6DurabilityWhen mated up to 50 cycles repeatedly by the rate of 10 cycle per minute.Contact Resistance 20mΩ (Max.)
5-7Vibration

Amplitude: 1.5mm P-P

Sweep time: 10-55-10 Hz in 1 minute Duration: 2 hours in each X.Y.Z. axes.

(Based upon MIL-STD-202 Method 201A)

Appearance No Damage.

Contact Resistance 20mΩ (Max.)

Discontinuity 1 μsec.(Max.)

5-8Physical Shock490m/s²{50G},3 strokes in each X.Y.Z. axes. (Based upon JIS C0041/MIL-STD-202 Method 213B Cond. A)

 

 

6. Environmental Performance And Others

 

Test DescriptionProcedureRequirement
6-1Temperature RiseCarrying rated current load.(Based upon UL 498)30℃(Max.)
6-2Heat Resistance85±2℃,96 hours (Based upon JIS C0021/MIL-STD-202 Method 108A Cond. A)

Appearance No Damage.

Contact Resistance 20mΩ (Max.)

6-3Cold Resistance-25±3℃,96 hours (Based upon JIS C0020)
6-4Humidity

Temperature: 40±2℃

Relative Humidity : 90~95%

Duration: 96 hours

(Based upon JIS C0022/MIL-STD-202 Method 103B Cond. B)

Appearance No Damage.

Contact Resistance 20mΩ (Max.)

Insulation Resistance 100MΩ (Min.)

Dielectric Withstanding Voltage Must meet 4-3

6-5Temperature Cycling

5 cycles of:

a) -55℃ 30 minutes

b) +85℃ 30 minutes

(Based upon JIS C0025)

Appearance No Damage.

Contact Resistance 20mΩ (Max.)

6-6Salt SprayTin-plated 12 hours / Gold- plated 24 hours exposure to a salt spray from the 5±1% solution at 35±2℃. (Based upon JIS C0023/MIL-STD-202 Method 101D Cond. B)
6-7SO2 Gas

24 hours exposure to 50±5ppm.

SO2 gas at 40±2℃.

6-8NH3 Gas40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution.
6-9Solderability

Soldering Time: 5±0.5 sec.

Solder Temperature: 245±5℃

Solder Wetting 95% of immersed area must show no voids, pin holes
6-10Resistance to Soldering Heat

Solder pot method

Soldering time: 10±0.5 sec.

Solder Temperature: 260±5℃

Solder iron method

Soldering Time: 5±0.5 sec.

Solder Temperature: 370℃ ~ 400℃

Appearance No Damage.

 

7. Actuator Insertion/Withdrawal Force

[Unit : kgf]

CircuitsAt Initial
Insertion (Max.)Withdrawal (Min.)
Single1.500.30
0410.002.50
 

 

 

3, FAQ


Q:Do you allow multiple design per setup?
A:Yes.We accept OEM/ODM service and allow multiple design per setup.

Q:How long does shipping take?
A:It depends on the destination location and quantity. In most developed country, delivery by Fed x/UPS/DHL is normally 2-3 days(excluding weekends).

Q: How is the goods packaged ?
A: Usually in PE bads, tube, pipe and with outside carton box.

Hot Products

Product Description PRODUCT NAME Wire harness for Household appliances Specification: According to ...
Product details Descriptions: Product Name wire harnesses with 6.35mm pitch connectors Colour ...
Wire Harnesses for Electronics Device with 3.96mm Pitch VH Connector Compatible JST Connectors >>>>>...
Discrete Wire Harnesses With 3.0mm Pitch Wire Assembly Micro-Fit 3.0 Connector System Product ...
Product Description 1.Product Name Cable assembly/ wire harness/Automobile cable 2.Certificate UL...
Product details Brand HRT Condition Make to order MOQ 1000 pieces Size & Color any size , color and ...