|
[China]
Trade Verify
Address: No.A1507H2 Xinhe Century Building, 3069 Caitian Rd, Gangxia Community, Futian District, Shenzhen City, China
Contact name:Ricky Zou
RULETEAM CONNECTION TECHNOLOGY (SHENZHEN) CO.,LTD |
|
Verified Suppliers
|
|
|
2.0mm pitch housing wire to wire connector type with PA66 material
halogen free parts C2003HF
1, Specification excel of part
| Detailed information | ||||
Basic size information | Circuits | From 2pins to 16pins | ||
| Insulation O.D. | 1.40mm(Max) | |||
| Mating lock | None | |||
| Wire range | AWG24# to 28# | |||
| Halogen Free | Nylon 66,UL94V-0 | |||
| None HF type material | PBT,UL94V-0 | |||
| Matched Terminals | A2003F-T series | |||
| Electrical properties | Current Rating | 2A AC, DC | ||
| Voltage Rating | 125V AC, DC | |||
| Contact Resistance | 20mΩ Max | |||
| Insulation Resistance | 1000mΩ min | |||
| Withstanding Voltage | 500V AC/minute | |||
| Mechanical properties | Temperature range | -25℃ to 85 ℃ | ||
| Terminal Insertion Force | 1.50 kgf (Max.) | |||
| Terminal/Housing Retention Force | 1.20 kgf (Min.) | |||
| Crimping Pull Out Force | AWG#24 3.0 kgf (Min.) AWG#26 2.0 kgf (Min.) AWG#28 1.0 kgf (Min.) | |||
| Other information please kindly check the following picture. | ||||
2, Corresponding engineering drawing &
test report
Below file is our engineering drawing and testing report for
further information. It's sure that it will be a
good reference for you to know this series parts clearly. 
Mechanical Performance
| Test Description | Procedure | Requirement | ||
| 5-1 | Actuator Insertion & Withdrawal Force | Insert and withdraw actuator at the speed rate of 25±3mm / minute. | Refer to paragraph 7 | |
| 5-2 | Crimping Pull Out Force | Fix the crimped terminal, apply axial pull out force on the wire at the speed rat of 25±3mm / minute.(Based upon JIS C5402 6.8) | AWG#24 | 3.0 kgf (Min.) |
| AWG#26 | 2.0 kgf (Min.) | |||
| AWG#28 | 1.0 kgf (Min.) | |||
| 5-3 | Terminal Insertion Force. | Insert the crimped terminal into the housing. | 1.50 kgf (Max.) | |
| 5-4 | Terminal/Housing Retention Force. | Apply axial pull out force at the speed rate of 25±3mm / minute on the terminal assembled in the housing. | 1.20 kgf (Min.) | |
| 5-5 | Durability | When mated up to 50 cycles repeatedly by the rate of 10 cycle per minute. | Contact Resistance 40mΩ (Max.) | |
| 5-6 | Vibration | Amplitude: 1.5mm P-P Sweep time: 10-55-10 Hz in 1 minute Duration: 2 hours in each X.Y.Z. axes. (Based upon MIL-STD-202 Method 201A) | Appearance No Damage. Contact Resistance 40mΩ (Max.) Discontinuity 1 μsec.(Max.) | |
| 5-7 | Physical Shock | 490m/s²｛50G｝,3 strokes in each X.Y.Z. axes. (Based upon JIS C0041/MIL-STD-202 Method 213B Cond. A) | ||
3,Our comprehensive service
We can offer better service for you in order to have a long and
two-win business relationship, also to build personal friendship.
