Home Companies RULETEAM CONNECTION TECHNOLOGY (SHENZHEN) CO.,LTD

UL94V-0 Wire Board Connector , 1 Row Circuit Wire Connectors With Lock / Bump A1253HA

RULETEAM CONNECTION TECHNOLOGY (SHENZHEN) CO.,LTD

Contact Us

[China] country

Trade Verify

Address: No.A1507H2 Xinhe Century Building, 3069 Caitian Rd, Gangxia Community, Futian District, Shenzhen City, China

Contact name:Ricky Zou

Inquir Now

RULETEAM CONNECTION TECHNOLOGY (SHENZHEN) CO.,LTD

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

UL94V-0 Wire Board Connector , 1 Row Circuit Wire Connectors With Lock / Bump A1253HA

Country/Region china
City & Province shenzhen guangdong
Categories Connectors
InquireNow

Product Details

 

 

UL94V-0 Wire Board Connector , 1 Row Circuit Wire Connectors With Lock / Bump A1253HA

 

1, The specification of the product including basic size information, electrical and mechanical properties.

Basic size information
ColorWhite
Pitch1.25mm
Mating lockWith
BumpWith
MaterialPA66
FlammabilityUL94V-0
Wire Insulation Diameter 1.00mm Max.
Mounting sideStandard on-Board
Terminals materialphosphor bronze, tin-plated/gold-flash finish
 
                                                       Electrical properties
Current Rating1A AC, DC
Voltage Rating150V AC, DC
Contact Resistance30mΩ Max
Insulation Resistance500mΩ min
Withstanding Voltage500V AC/minute
 
                                                         Mechanical properties
Operating Temperatureemperature range-25℃ to 85 ℃
Terminal Insertion Force 0.80kgf (Max.)
Terminal/Housing Retention Force0.50kgf (Min.)
Pin Retention Force0.50kgf (Min.)
 
                           Other information please kindly check the following picture.

 

2, Introduction for this series products

Please kindly notice that the A1253 series product, if you can buy this product as a set, the price will be very reasonale and favorable.

1, Terminals:A1253-T & A1253-T-A

 

2, Housing: With lock type: A1253H-NP; Without lock type: A1253HA-NP

 

3, Wafer: Right angle type(90°):A1253WR-S-NP & A1253WR-SF-NP & A1253WRA-S-NP      

              Vertical type(180°): A1253WVA-S-NP

 

3, Related engineering drawing and report

Please kindly check the following engineering drawing to confirm the size, wish it's what you really need.

 

                                                                       Dimension drawing                                                              

 

                                                                              Testing report                                                             

3. Ratings & Applicable Wires

 

ItemStandard
Rated Voltage (Max.)150V AC/DCInsulation O.D. 0.90mm (Max.)
Rated Current (Max.) And Applicable WiresAWG#281A AC/DC
AWG#301A AC/DC
AWG#321A AC/DC
Ambient Temperature Range-25℃ ~ +85℃*

*: Including terminal temperature rise

 

 

4. Electrical Performance

 

Test DescriptionProcedureRequirement
4-1

 

Contact Resistance

 

Mate connectors, measure by dry circuit, 20mV max., 10mA.(Based upon JIS C5402 5.4)20mΩ (Max.)
4-2Insulation ResistanceMate connectors, apply 500V DC between adjacent terminal or ground. (Based upon JIS C5402 5.2/MIL-STD-202 Method 302 Cond. B)500MΩ (Min.)
4-3Dielectric Withstanding VoltageMate connectors, apply 500V AC (rms) for 1 minute between adjacent terminal or ground. (Based upon JIS C5402 5.1/MIL-STD-202 Method 301)No Breakdown.
4-4Contact Resistance on Crimped PortionCrimp the applicable wire on to the terminal, measure by dry circuit, 20mV (Max.)., 10mA.5mΩ (Max.)

 

5. Mechanical Performance

 

Test DescriptionProcedureRequirement
5-1Actuator Insertion & Withdrawal ForceInsert and withdraw connectors at the speed rate of 25±3mm / minute.Refer to paragraph 7
5-2Crimping Pull Out ForceFix the crimped terminal, apply axial pull out force on the wire at the speed rat of 25±3mm / minute.(Based upon JIS C5402 6.8)AWG#281.0kgf (Min)
AWG#300.8kgf (Min)
AWG#320.5kgf (Min)
5-3Terminal Insertion Force.Insert the crimped terminal into the housing.0.80kgf (Max.)
5-4Terminal/Housing Retention Force.Apply axial pull out force at the speed rate of 25±3mm / minute on the terminal assembled in the housing.0.50kgf (Min.)
5-5Pin Retention ForceApply axial push force at the speed rate of 25±3mm / minute0.50kgf (Min.)
5-6Latch Yield Strength

Mate connectors and pull apart until both latches break at the speed rate of

25±3mm / minute

02P: 0.8kgf (Min.) ; 03P: 1.2kgf (Min.)

04P: 2.0kgf (Min.) ; 5~10P: 2.2kgf (Min.)

11-15P: 2.3kgf (Min.) ;20P: 2.4kgf (Min.)

30P: 2.45kgf (Min.)

5-7DurabilityWhen mated up to 50 cycles repeatedly by the rate of 10 cycle per minute.Contact Resistance 40mΩ (Max.)
5-8Vibration

Amplitude: 1.5mm P-P

Sweep time: 10-55-10 Hz in 1 minute Duration: 2 hours in each X.Y.Z. axes.

(Based upon MIL-STD-202 Method 201A)

Appearance No Damage.

Contact Resistance 40mΩ (Max.)

Discontinuity 1 μsec.(Max.)

5-9Physical Shock490m/s²{50G},3 strokes in each X.Y.Z. axes. (Based upon JIS C0041/MIL-STD-202 Method 213B Cond. A)

 

 

6. Environmental Performance And Others

 

Test DescriptionProcedureRequirement
6-1Temperature RiseCarrying rated current load.(Based upon UL 498)30℃(Max.)
6-2Heat Resistance85±2℃,96 hours (Based upon JIS C0021/MIL-STD-202 Method 108A Cond. A)

Appearance No Damage.

Contact Resistance 40mΩ (Max.)

6-3Cold Resistance-25±3℃,96 hours (Based upon JIS C0020)
6-4Humidity

Temperature: 40±2℃

Relative Humidity : 90~95%

Duration: 96 hours

(Based upon JIS C0022/MIL-STD-202 Method 103B Cond. B)

Appearance No Damage.

Contact Resistance 40mΩ (Max.)

Insulation Resistance 50MΩ (Min.)

Dielectric Withstanding Voltage Must meet 4-3

6-5Temperature Cycling

5 cycles of:

a) -55℃ 30 minutes

b) +85℃ 30 minutes

(Based upon JIS C0025)

Appearance No Damage.

Contact Resistance 40mΩ (Max.)

6-6Salt SprayTin-plated 24 hours / Gold- plated 24 hours exposure to a salt spray from the 5±1% solution at 35±2℃. (Based upon JIS C0023/MIL-STD-202 Method 101C Cond. B)
6-7SO2 Gas

24 hours exposure to 50±5ppm.

SO2 gas at 40±2℃.

6-8NH3 Gas40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution.
6-9Solderability

Soldering Time: 5±0.5 sec.

Solder Temperature: 245±5℃

Solder Wetting 95% of immersed area must show no voids, pin holes
6-10Resistance to Soldering Heat

When reflowing

Refer to paragraph 8

Solder iron method

Soldering Time: 5±0.5 sec.

Solder Temperature: 370℃ ~ 400℃

Appearance No Damage.

 

7. Actuator Insertion/Withdrawal Force

 

SMT (WITHOUT A LOCK) [Unit : kgf] LOCK [Unit : kgf]

CircuitsAt Initial CircuitsAt Initial
Insertion (Max.)Withdrawal (Min.) Insertion (Max.)Withdrawal (Min.)
Single0.200.04 Single0.400.20
020.700.15 020.750.80
030.850.20 031.131.20
041.000.25 041.502.00
051.150.30 051.882.20
061.300.35 062.252.20
071.450.40 072.632.20
081.600.45 083.002.20
091.750.50 093.382.20
101.900.55 103.802.20
112.050.60 114.132.30
122.200.65 124.502.30
132.350.70 134.882.30
142.500.75 145.252.30
152.650.80 155.632.30
203.401.05 207.502.35
254.151.30 259.382.35
304.901.55 3011.252.40

 


4, FAQ
Q:Do you allow multiple design per setup?
A:Yes.We accept OEM service and allow multiple design per setup.

Q:How long does shipping take?
A:It depends on the destination location and quantity. In most developed world, delivery by Fed x/UPS/DHL is normally 3-5 days(excluding weekends).

Q: How is the goods packaged ?
A: Usually in bags, tube, pipe, plated & carton

 

 

 

5, Various payment & delivery way

In order to make you get product quickly and send money easily, we can offer differenct payment terms 

for you.

                                                                  Payment Policy                                                                          

       Total value of order(Currency: USD )                     Suggested payment terms
Less than USD350            PayPal or Wester Union
  
Between USD350 and USD500                  Western Union
  
Between USD500 and USD5000                          TT
  
Over USD5000

                    TT or L/C at sight

 

         The commision fee of TT/PayPal/ Letter of credit  will be shared by us together. 

 

                                                                         Delivery ways                                                                     

Hot Products

Product Description PRODUCT NAME Wire harness for Household appliances Specification: According to ...
Product details Descriptions: Product Name wire harnesses with 6.35mm pitch connectors Colour ...
Wire Harnesses for Electronics Device with 3.96mm Pitch VH Connector Compatible JST Connectors >>>>>...
Discrete Wire Harnesses With 3.0mm Pitch Wire Assembly Micro-Fit 3.0 Connector System Product ...
Product Description 1.Product Name Cable assembly/ wire harness/Automobile cable 2.Certificate UL...
Product details Brand HRT Condition Make to order MOQ 1000 pieces Size & Color any size , color and ...