Active Member
|
[China]
Address: 6-11C Shidai Jingyuan Fuyong Town, Baoan District, Shenzhen City, Guangdong Province, China
Contact name:Sally Mao
Shenzhen Bicheng Electronics Technology Co., Ltd |
|
|
Unleashing the Power of RF-35 High Frequency PCB: Next-Level Substrate Technology
Introduction:
In the realm of high-frequency applications, performance and
reliability reign supreme. Enter the RF-35 High Frequency PCB, a
revolutionary solution born from Taconic's expertise in coated PTFE
fiberglass and ceramic fill technologies. Get ready to witness the
game-changing capabilities and exceptional construction of RF-35,
setting a new benchmark in high-frequency substrate technology.
Discover the RF-35 Substrate:
Let's delve into the extraordinary properties that make RF-35 a
true industry disruptor. Operating at 1.9 GHz, it boasts an
impressive dielectric constant of 3.50, accompanied by an ultra-low
dissipation factor of 0.0018. With a moisture absorption rate as
low as 0.02% at .060 inch, RF-35 guarantees unwavering stability,
even in the harshest environments.
Uncompromising Strength and Stability:
RF-35 goes above and beyond when it comes to mechanical robustness
and dimensional stability. It exhibits an exceptional peel strength
of over 8.0 lbs./linear inch for 1/2 oz. copper and exceeds 10.0
lbs./linear inch for 1 oz. copper, as verified by IPC-TM 650 2.4.8
standards. With an arc resistance surpassing 180 seconds, as per
IPC TM 650 2.5.1, RF-35 ensures steadfast performance under the
most demanding conditions.
Exceptional Thermal Management:
Equipped with a high Tg value surpassing 315°C, RF-35 excels at
thermal management. Its impressive thermal conductivity of 0.24
W/m/K, measured by ASTM F 433, effectively dissipates heat,
guaranteeing optimal performance for power amplifiers, passive
components, filters, and couplers.
Precision Machining Considerations:
Machining PTFE-based substrates can present unique challenges due
to the softness of the PTFE resin system. RF-35 employs a
heavyweight 7628 glass style, offering outstanding dimensional
stability and rigidity. However, achieving precise drilling and
routing may require specialized expertise due to the heavier
fiberglass weave.
Conclusion:
The RF-35 High Frequency PCB epitomizes our unwavering commitment
to delivering top-notch product quality and fostering trust. Its
exceptional characteristics, including minimal dielectric loss,
high peel strength, and superior thermal management capabilities,
position it as the ultimate choice for high-frequency applications.
Experience the unparalleled power of RF-35 and unlock new realms of possibility in your high-frequency designs. Rely on our dedication to providing cutting-edge solutions that not only meet but exceed your expectations.
PCB Capability (RF-35)
| Property | Test Method | Unit | Value | Unit | Value |
| Dielectric Constant @ 1.9 GHz | IPC-TM 650 2.5.5 | 3.5 | 3.5 | ||
| Dissipation Factor @ 1.9 GHz | IPC-TM 650 2.5.5 | 0.0018 | 0.0018 | ||
| Moisture Absorption (.060") | IPC-TM 650 2.6.2.1 | % | 0.02 | % | 0.02 |
| Peel Strength (1/2 oz. copper) | IPC-TM 650 2.4.8 | lbs./linear inch | >8.0 | N/mm | >1.5 |
| Peel Strength (1 oz. copper) | IPC-TM 650 2.4.8 | lbs./linear inch | >10.0 | N/mm | >1.8 |
| Dielectric Breakdown | IPC-TM 650 2.5.6 | kV | 41 | kV | 41 |
| Volume Resistivity | IPC-TM 650 2.5.17.1 | Mohm/cm | 1.26 x 109 | Mohm/cm | 1.26 x 109 |
| Surface Resistivity | IPC-TM 650 2.5.17.1 | Mohm | 1.46 x 108 | Mohm | 1.46 x 108 |
| Arc Resistance | IPC TM 650 2.5.1 | seconds | >180 | seconds | >180 |
| Flexural Strength Lengthwise | ASTM D 790 | psi | >22,000 | N/mm2 | >152 |
| Flexural Strength Crosswise | ASTM D 790 | psi | >18,000 | N/mm2 | >124 |
| Tensile Strength Lengthwise | ASTM D 638 | psi | 27,000 | N/mm2 | 187 |
| Tensile Strength Crosswise | ASTM D 638 | psi | 21,000 | N/mm2 | 145 |
| Dimensional Stability Lengthwise | IPC-TM 650 2.4.39 | in/in | 0.00004 | mm/mm | 0.00004 |
| Dimensional Stability Crosswise | IPC-TM 650 2.4.39 | in/in | -0.0001 | mm/mm | -0.0001 |
| Tg | TMA | °C | >315 | °F | >600 |
| Thermal Conductivity | ASTM F 433 | W/m/K | 0.24 | W/m/K | 0.24 |
| X-Y CTE | ASTM D 3386 (TMA) | ppm/°C | 19-24 | ppm/°C | 19-24 |
| Z CTE | ASTM D 3386 (TMA) | ppm/°C | 64 | ppm/°C | 64 |
| Flammability | UL-94 | V-0 | V-0 | ||
| Hardness | Rockwell M Scale | 34 | 34 |
Thank you for joining us on this captivating journey. Stay tuned for more thrilling updates. Until we meet again!
