Home Companies Shenzhen Bicheng Electronics Technology Co., Ltd

TLY-5 High Frequency PCB

Shenzhen Bicheng Electronics Technology Co., Ltd
Active Member

Contact Us

[China] country

Address: 6-11C Shidai Jingyuan Fuyong Town, Baoan District, Shenzhen City, Guangdong Province, China

Contact name:Sally Mao

Inquir Now

Shenzhen Bicheng Electronics Technology Co., Ltd

TLY-5 High Frequency PCB

Country/Region china
City & Province shenzhen guangdong
Categories Car Chargers
InquireNow

Product Details

Hello Everyone,

Today, we're talking about high frequency PCB built on TLY material.

 

TLY laminates are manufactured with very lightweight woven fiberglass, which are from Taconic Company. They are more dimensionally stable than chopped fiber reinforced PTFE composites. Since they are more mechanically stable, it is suitable for high volume manufacturing.

 

The low dissipation factor enables successful deployment for automotive radar applications designed at 77 GHz as well as other antennas in millimeter wave frequencies.

 

We benefit from its following advantages:

1. Dimensionally stable:

High volume fabrication becomes possible.

2. Lowest DF

In the low dielectric constant range, the dissipation factor is approximately 0.0009 at 10 GHz.

3. Low moisture absorption

It can work in severe environment.

4. High copper peel strength

It’s high up to 2.32, dimensionally stable.

5. Uniform and consistent DK

For most thicknesses, the dielectric constant can be specified anywhere within this range with a tolerance of +/-0.02

 

Typical applications include:

Automotive radar

Cellular communications

Satellite communications

Power amplifiers, Filters, couplers

LNBs, LNAs, LNCs

Aerospace, avionics

Phased array antennas

 

There’re 6 members in TLY family. We have stock for TLY-5. Others are purchased according to clients’ requirement.

 

PCB Capability
PCB Material:Lightweight Woven Fiberglass
TLY Family (Dielectric constant ±0.02)TLY-5A (DK=2.17)
TLY-5A-L (DK=2.17)
TLY-5 (DK=2.20)
TLY-5-L (DK=2.20)
TLY-3 (DK=2.33)
TLY-3FF (DK=2.33)
Layer count:1 Layer, 2 Layer, 4 Layer.
Copper weight:0.5oz, 1oz, 2oz
PCB thickness:0.2mm, 0.3mm, 0.6mm,
0.8mm, 1.6mm
PCB Size:≤400mm X 500mm
Surface finish:Bare copper, HASL, ENIG, Immersion tin etc.
  

 

Bicheng specializes in providing you with prototype, small batches and mass production service.

If you have any questions, please feel free to contact us.

Thank you for your reading.

 

 

Hot Products

TC600 High Frequency PCB 50mil 1.27mm Double Sided Microwave Circuit Board With Immersion Silver ...
Taconic TLY-5Z High Frequency PCB 50mil 1.27mm TLY-5Z 2-Layer Printed Circuit Board with Immersion ...
Rogers 5880LZ High Frequency PCB RT/duroid 5880LZ 50mil 1.27mm 2-Layer Circuit Board with Immersion ...
RO4535 High Frequency PCB Rogers 4535 30mil 0.762mm Antenna Circuit Board 2-Layer with Immersion ...
30mil RF-45 High Frequency PCB with Blue Solder Mask Coating Immersion Silver on Pads (Printed ...
TRF-45 RF PCB 1.0mm Double Sided High Thermal Conductivity Low Loss PCB (Printed Circuit Boards are ...