AD8062ARZ Power Mosfet Transistor Rail-to-Rail Amplifiers ic chip mosfet power amplifiers

AD8062ARZ Low Cost, 300 MHz Rail-to-Rail Amplifiers

FEATURES
Low cost Single (AD8061), dual (AD8062)
Single with disable (AD8063)
Rail-to-rail output swing
Low offset voltage: 6 mV
High speed
   300 MHz, −3 dB bandwidth (G = 1)
   650 V/μs slew rate
   8.5 nV/√Hz at 5 V
   35 ns settling time to 0.1% with 1 V step
Operates on 2.7 V to 8 V supplies
   Input voltage range = −0.2 V to +3.2 V with VS = 5 V
Excellent video specifications (RL = 150 Ω, G = 2)
  Gain flatness: 0.1 dB to 30 MHz
  0.01% differential gain error
  0.04° differential phase error
35 ns overload recovery
Low power
  6.8 mA/amplifier typical supply current
  AD8063 400 μA when disabled
APPLICATIONS
Imaging
Photodiode preamps
Professional video and cameras
Handsets
DVDs/CDs
Base stations
Filters
ADC drivers
Clock buffers
ABSOLUTE MAXIMUM RATINGS 

MAXIMUM POWER DISSIPATION
The maximum power that can be safely dissipated by the AD8061/AD8062/AD8063 is limited by the associated rise in junction temperature. The maximum safe junction temperature for plastic encapsulated devices is determined by the glass transition temperature of the plastic, approximately 150°C. Temporarily exceeding this limit may cause a shift in parametric performance due to a change in the stresses exerted on the die by the package. Exceeding a junction temperature of 175°C for an extended period can result in device failure. While the AD8061/AD8062/AD8063 is internally short-circuit protected, this may not be sufficient to guarantee that the maximum junction temperature (150°C) is not exceeded under all conditions. To ensure proper operation, it is necessary to observe the maximum power derating curves

STOCK LIST